LoadingReadyRun: knife vs Gatling gun, the age old contest
Astrovore: I saw the stream name, was not expecting this but maybe I should have
e_bloc: knife's a safe bet as long as you're less than 10 feet away
MilkInBags: live mic
Buxx345: there's no end in sight
PopeWorldbuild: There is no satisfaction. Only infinite mansion.
CrossXhunteR: would alex appreciate all of these knives
MilkInBags: prove it
moamyn:
Thank you Alex 
NeoKevlar: i mean, you were too busy buying out the weskers
Juliamon: I don't think it's Let's Nope that takes forever to finish games. I think it's just horror games in general.
LoadingReadyRun: Escapes from the dead city, Dies
MilkInBags: gg
dweebert91 subscribed at Tier 1. They've subscribed for 78 months!
LRRbot:
Thanks for subscribing, dweebert91! (Today's storm count: 21)
pn55:
Buxx345: HE DIED
dagoth__ur_: you did it
accountmadeforants:
ghizmou: the madlads, they did it
pn55:
Perfect! 
Dread_Pirate_Westley: Doesn't it only do 20?
e_bloc:
PopeWorldbuild: Lies and slander
CrossXhunteR: false alarm, he lives (but died?)
dagoth__ur_: wouldnt dream of it
QuixoticScrivener: hype
n3ther: we're in purgatory still
CrossXhunteR: did the licker get bottomed?
7gorobei: he died, but got better
e_bloc: god willing
Buxx345: @CrossXhunteR happy pride
nightsreach: how many doors does this mansion have=
Astrovore: licker bottom? hu hu hu
LoadingReadyRun: @nightsreach a lot
n3ther: no context needed
e_bloc: its only polite
QuantumTwitch: its. like a perfect rendition of RE
fjordsword: Wheeler "I've Got This" ... dies repeatedly
LoadingReadyRun: Wait, kick open door, fight monster or get treasure? Is this just Munchkin?
KWardJenx: Wheeler is Jack Burton in this adventure
Krillin_fan:
it's not NOT Munchkin
dagoth__ur_: are knives bad?
brainbosh: This is not the Resident Evil I was expecting to see at this time
ghizmou: the real horror was the game never ending
DarkMorford: Zombie munchkins?
NeoKevlar: if you die, you come back with 10 life, right?
CrossXhunteR: i thought the herb came into play earlier but am unsure
Dread_Pirate_Westley: Inscryption episode 4 was 4:09
dagoth__ur_: FREEDOM
dagoth__ur_: Oroboros is strong in this game too?
pn55:
youcantlistentobuttons: I have to go pick up a pizza, thanks for a fun Card game y'all!
Manae: !next
LRRbot: Next scheduled stream: Bonus Stream (Graham is away, so Alex will play with heavy machinery on tonight's Bonus Stream. Game: Milling Machine Simulator) at Tue 05:00 PM PDT (0s from now).
n3ther: Huzzah!
ContingentCat: great timing
Astrovore: And here I thought milling machine was a joke about how this game was going
NeoKevlar: Congrats to Knife Guy!
PharaohBender27:
PopeWorldbuild: Oh dear
dagoth__ur_: you can get one game in
RayFK: Look I saw you try and Canlander on a tiny table
n3ther: oh he'll make it work
CrossXhunteR: oh, so 3 games
PopeWorldbuild: Thank you for the stream
PharaohBender27: "No I will *not* put my tray up! I'm playing a game!"
n3ther:
Strebenherz: !next
LRRbot: Next scheduled stream: Bonus Stream (Graham is away, so Alex will play with heavy machinery on tonight's Bonus Stream. Game: Milling Machine Simulator) at Tue 05:00 PM PDT (1m ago).
Strebenherz: !patreon
Strebenherz: !store
Juliamon: oh boy SGF already?
NeoKevlar: what decks?
CrossXhunteR: and paul?
ButButTheJesus: @Juliamon yarp, Sony already had a thing today
xantos69:
50 Bits
NeoKevlar: And thank you to alex
shendaras:
n3ther:
ContingentCat:
Happy pride 
RechargeableFrenchman:
loufghyslaufey: BUTT! Does he...??
Astrovore:
Juliamon:
SimGuy3k: I feel like I was just here
calculated_uncertainties:
100 1
niccus: you've heard of milsim, now it's time for millsim
baltimore_667083:
exeJayce: hey look we've all been here before
prince_infidel:
Gaelan_Maestro subscribed with Prime. They've subscribed for 59 months!
Gaelan_Maestro: Almost 60!
LRRbot:
Thanks for subscribing, Gaelan_Maestro! (Today's storm count: 22)
thebuzzstreams: Wooo! No longer just milling cards but milling all sorts of other stuff!
TehAmelie: milling machine? are we gonna be Conan? (second time today this has come up)
ErynTzun: oh Hai, no garbage day today?
Strebenherz: bets on whether this is a game or a webcam as alex works on irl milling?
DarkMorford subscribed at Tier 1. They've subscribed for 146 months, currently on a 146 month streak!
DarkMorford: If you don't spend an hour tramming your table first, is it really an accurate simulator?
LRRbot:
Thanks for subscribing, DarkMorford! (Today's storm count: 23)
Greyah subscribed at Tier 1. They've subscribed for 85 months!
LRRbot:
Thanks for subscribing, Greyah! (Today's storm count: 24)
kingandcommoner subscribed at Tier 1. They've subscribed for 12 months!
LRRbot:
Thanks for subscribing, kingandcommoner! (Today's storm count: 25)
Strebenherz: @ErynTzun G was busy with stuff ircc
noonetoday subscribed with Prime. They've subscribed for 74 months!
LRRbot:
Thanks for subscribing, noonetoday! (Today's storm count: 26)
ErynTzun: ooooh Milling Machine with Alex I see!
Juliamon: G mentioned last night that this would be a bonus stream today
realbadatthis_: @Strebenherz might be the con crud quarantine
ErynTzun: I was very eepy near the end of that I missed it
Strebenherz watched 5 consecutive streams and sparked a watch streak!
Juliamon: I would put money on it being PPR prep myself
Juliamon: !ppr
nevyn666 subscribed at Tier 1. They've subscribed for 16 months, currently on a 15 month streak!
LRRbot:
Thanks for subscribing, nevyn666! (Today's storm count: 27)
Strebenherz: sounds like he's okay/good either way at least, not like "and suddenly bs happened"
themercenary1987 subscribed at Tier 1. They've subscribed for 35 months!
themercenary1987: Almost three years since subbing! Thankyou for all the entertainment!
LRRbot:
Thanks for subscribing, themercenary1987! (Today's storm count: 28)
gnyrinn subscribed at Tier 1. They've subscribed for 94 months, currently on a 94 month streak!
gnyrinn: Simulated milling? Sure, I'm interested.
LRRbot:
Thanks for subscribing, gnyrinn! (Today's storm count: 29)
Nigouki: can't wait for the break baking part after we do all the milling
247Gremlin subscribed at Tier 1. They've subscribed for 108 months!
247Gremlin: 108 months, that's like 2 years!
LRRbot:
Thanks for subscribing, 247Gremlin! (Today's storm count: 30)
realbadatthis_: high speeds, low feeds folks
LRRbot:
If you see something funny or particularly noteworthy, make a Clip of it! Your clip could appear in a fortnightly video or be seen at https://www.twitch.tv/loadingreadyrun/clips (Please give your clips descriptive names if you want them to be seen!)
lamina5432: even
Driosenth: No place like G54
margieargie: I will say that, for better or worse, I read it as "Milking Machine Simulator" at first...
DarkMorford: @Driosenth I like G28 myself
baltimore_667083: hi Alex!
Juliamon: ADAM
Strebenherz: PFFFFT
thebuzzstreams: @margieargie we are all but milking machine simulators
Nigouki: lmao
CaptainSpam: ADAM
neisan2112: Oh lololo
ShaneLeeAtk: Ha!
ghyllnox:
Strebenherz: CLASSIC
SnackPak_: that haus rides again!
DeM0nFiRe:
ButButTheJesus: MUH NOSTALGIA
Omthebox: Adam you got a hat
Kramburger: Adam did for Saroa
Viewers_Like_You: Oh hey, it's the past again!
Saintnex: hehehe
gualdhar: oh I'm on camera HI MOM
betweenmyself:
something something Milling something something Magic the Gathering 
exeJayce: lrr.exe has stopped working
e_bloc:
Diabore: alex broke into the gamehaus
Strebenherz: no no, keep it this is great
shendaras:
Kramburger: *saros
KeithulhuCards: Lol
ErynTzun: I was gonna say do they also have CNC machine in this and yes they do it's a DLC but of course
NimrodXIV: Adam did a thing
margieargie: Hey Adam!
neisan2112: Woops
droodtheozeference: Heh. Ancient interface.
ButButTheJesus: hi alex
baltimore_667083: itโs sure going
Nigouki: hallo
pn55: Don't even worry about it
JKBalch: Heck yeah Alex
Strebenherz: oh it was quarantine
DeM0nFiRe: No watching today, only playing
stove_melon: i saw the stream title. explain yourself right now young man
ErynTzun: oh he's quarantining for safety, makes sense.
exeJayce: "play whatever you want" is the best
merrickdragoon subscribed with Prime. They've subscribed for 60 months!
LRRbot:
Thanks for subscribing, merrickdragoon! (Today's storm count: 31)
Strebenherz: Okay is this a game, or are we just watching you do irl milling
TheMerricat:
Thst was Adam's bonus stream overlay 
droodtheozeference subscribed at Tier 1. They've subscribed for 79 months!
droodtheozeference: Resubbing so Alex has to try to pronounce my username.
LRRbot:
Thanks for subscribing, droodtheozeference! (Today's storm count: 32)
Weagle subscribed at Tier 1. They've subscribed for 111 months, currently on a 111 month streak!
Weagle: Butts.
LRRbot:
Thanks for subscribing, Weagle! (Today's storm count: 33)
Viewers_Like_You: We did this!
OldUncleDan: Pride of Happiness, everyone!
Driosenth: Do you start out with your grandpappys clapped out off-brand Bridgeport
ghyllnox: Good news! You're the top (only) streamer in Milling Machine 3D!
KeithulhuCards: Multidisciplinary Entertainment Hole was my nickname in college
ButButTheJesus: i don't think i knew that
Driosenth: CRASH CRASH CRASH!
TehAmelie: do we hope it's the Guitar Hero of metalworking?
GasCityGaming:
Ooo there's a demon on steam for this 
GasCityGaming: demo*
shea_wolfe: I was promised ever forward never learning
DarkMorford:
I watch Blondihacks, I'm 100% ready for this 
JKBalch: Please don't lose fingers
Viewers_Like_You: Gesundeheit
Natural_Ones_Only: Is this CNC Mill or Manual
baltimore_667083: bless you
The_Lesser_Gatsby: Do you have your copy of Machinist Handbook ready?
Weagle: Oh hey Chair's joining you on stream!
Nigouki: i just want to know how fast you can launch your work from an untightened chuck
TehAmelie: a mysteriously powered generator, i bet
e_bloc: windpower
thebuzzstreams: it's all underground delivery
Viewers_Like_You: The walls have outlets in them, don't they?
Natural_Ones_Only: Gas Gen?
Juliamon: Natural_Ones_Only apparently CNC is DLC
OldUncleDan: Hidden magical Solar pannels?
Strebenherz: DAMN
Driosenth: That is TOO clean
Sethalidos: Better question what's with the out of phase tree
Natural_Ones_Only: @Juliamon Damn just like real life
NorthstarTex watched 3 consecutive streams and sparked a watch streak!
that sure is a nice looking machine
Nigouki: finest alibaba mill
ghyllnox: That's an awfully shiny machine for such a crungly building
GasCityGaming: That is the most expensive thing in that house, including the house.
The_Lesser_Gatsby: Welcome to My Summer Milling Machine
gualdhar: the only thing that isn't rusted
Driosenth: shed mills should be covered in 5mm of grease
DarkMorford: It turns metal into chips
e_bloc: I hope its a roguelite
Strebenherz:
@GasCityGaming that's the most expensive thing in the tri-county area
mercano82: Buried cables. Call Miss Utilities before you dig.
RedAlexxis: So today's stream is about exhausting your opponent's deck?
SnackPak_: boo
Mathwyn: It's a machine that mills, obviously
Nigouki: lol
Natural_Ones_Only: Tool go spin and part stay still
Driosenth: First task, "Make a Cube"
ratbabyonline: I MISSED THE START OF STREAM BECAUSE I WAS WATCHING CARTOONS ON ALEX'S DISCORD SERVER
OldUncleDan: Where I come from, a milling machine is the thing that makes flour.
TheMerricat:
Milling machines are 3D printers in reverse, for metal.
Astrovore: don't you dare put it in inches
TehAmelie: you can't spell mill without millimeter
Strebenherz: @ratbabyonline just started, it was a little late from is this your card
247Gremlin: Miller-meters?
TehAmelie: wait
PhuzNutz: "Lathe that stood up for itself" is really good.
taliesinskye: Many kinds of mills. Saw mills, flour mills, etc.
Manae: Just divide by 25 for "close enough"
ratbabyonline: @Strebenherz Ok phew
thebuzzstreams: we millin' tungsten today?
RedAlexxis: @TheMerricat That's the spirit! Time to make some bread
ErynTzun: I hear Canda uses a weird mixture of measuring depending on what it is lol
Nigouki: we gonna make a bronze bush?
Earthenone: General Mills
margieargie: Oooh, copper, I hope it's high-quality
Strebenherz: @ratbabyonline also no watch play tonight, so we have a bonus stream tonight. G is doing quarantine
Orlantia: 25.4mm/in
gnyrinn: "Inox" ... Is this a French game?
ErynTzun: *Canada I can type
Natural_Ones_Only: Mill: Tool Spin part move Lath: Part spin Tool move
PhuzNutz: @Manae You must be a woodworker (:
DarkMorford:
Mills and lathes are machines that turn raw metal stock into scrap 
ghyllnox: Is there a Standard Object in milling that one must create for calibration purposes?
ghyllnox: Hooooooo boy
RedAlexxis: oh no!
Strebenherz: fk and ik my beloved
SnackPak_: thats alotta windows
taliesinskye: @ghyllnox Sometimes a standard cube.
Going_Medium: Would you say this game is good, or just... Run of the mill?
Manae:
@PhuzNutz Engineer
Natural_Ones_Only: Cube?
Viewers_Like_You: You're probably making some sort of object
RedAlexxis: at least the concequences of getting it wrong here aren't a serious as disfigurement
Strebenherz: *please* tell me the bronze goes absolutely flying if you don't vice it
TehAmelie: this already feels like Homestuck crafting
taliesinskye: Like a one inch or one centimeter cube.
Natural_Ones_Only: Apprentice Mark time
Orlantia: @manae pi is 3 engineer or 5?
taliesinskye: It's easy to measure how close you got after, and that is your calibration
ratbabyonline: im very excited tools wise because i discovered theres a maker space thats actually in victoria and not a 40 minute bus ride from downtown
PhuzNutz: Close enough for all practical purposes. ::winkyface::
thebuzzstreams: Don't forget the eyepro
Manae: @Orlantia 3.14. If you need to use Pi you're past rough estimates
Mathwyn: Gotta take that handle off so a survival horror protagonist can find it later
TheMerricat: @ghyllnox You joke but not only are there, they are assigned ISO numbers. "ISO 10791-7 Test Pieces (M1โM5): The global standard for machining centers categorizes test parts into specific shapes to test linear interpolation, face milling flatness, angular positioning, and free-form surfaces."
RedAlexxis: yeah, another big advantage, a mistake doesn't cost you a $100 visit to a hardware store
LoadingReadyRun: !cardview off
LRRbot: Card viewer disabled
Natural_Ones_Only: Yummy Finger Eater
ratbabyonline: still need to get an apartment before i start any big projects though
Driosenth: I don't think I could spin the handle fast enough to properly engage a SC bit into bronze
ghyllnox: @TheMerricat Thank you! Idle curiosity rather than joek, I know there's a boat-type-thing for 3D print enthusiasts
ghyllnox: But a whole array, that's fascinating
Orlantia: Touch the forbidden pasta
DarkMorford: @ghyllnox Good ol' Benchy, yeah
PhuzNutz: With the shine on that steel, I have high hopes for the brass chips. 0_0
Natural_Ones_Only: God I wish i could edgefind with a mill bit
ErynTzun: It magically doesn't touch it
RealGamerCow: I thought the edge finder on a mill was a ball on the end of a stick
Driosenth: You aren't using a wiggler to find the edges?
korvys: Do you think british milling machines make crisps?
ghyllnox: \o/
Orlantia: You can if you're not a coward @natural_ones_only
Manae: I have edge-found by going slow and looking for the first chip
taliesinskye: I wonder if this game was designed as a way to train people to use the mill IRL
PhuzNutz: It's like the MIG of mills. (:
ErynTzun: We made a U
TehAmelie: a very thicc chair for a mouse
PhuzNutz: Think it's half a thicc "H"
RedAlexxis: A bronze block with a trench
taliesinskye: Next: a Klein bottle.
OldUncleDan: The UI of this game is very overwhelming.
DoodlestheGreat: After that: We build Frankenstein.
Juliamon: Now build the rest of the owl
Kaktus021: make a smaller cube from this cube
taliesinskye: It's ive
Mathwyn: It's cubes all the way down
Natural_Ones_Only: When was the last time you used a mill lately Alex?
DoodlestheGreat: For when you have to make a tractor.
OldUncleDan: Now you just need a 4-D milling machine so you can craft a Tesseract!
Manae: Hey that vice isn't secured
DigitalSeahorse: oh you're milling
DigitalSeahorse: sort of
Kaktus021: wonder if itโll let you take a chunk out of the vice
betweenmyself:
Want to see a crossover between this game and Surgeon Simulator. Spend fifteen minutes setting up the machine with precise instructions then watch as the patient ragdolls around the operating room. 
ratbabyonline: large cube size of a small cube
DigitalSeahorse: ad-vice would be to not chunk the vice
ratbabyonline: tinker tailor solder fry where alex is given a real lathe
gnyrinn: @betweenmyself You activate the Surgeon Simulator Easter-egg in this game by skipping the "put on safety equipment" step. Lots of eye stuff.
DigitalSeahorse:
Saintnex: welp
ErynTzun: LMAO
RealGamerCow: Bonk
betweenmyself: @gnyrinn eye stuff is the very best sort of stuff
Mathwyn:
thebuzzstreams: @ratbabyonline I read that as "a real lethal", but honestly that could be the same
ghyllnox: Tool fell off!
Strebenherz: YEET
DigitalSeahorse:
ratbabyonline: in the tone of "front fell off" tool fell off
ErynTzun: Great job Alex, perfect first move.
fiinnnaaaaannnnnnnn: I did not know what I expected when I read the game title but no, it's literally that
ErynTzun: At least that didn't happen while the machine was moving
ratbabyonline: @thebuzzstreams alex seems cool, i prefer an alive alex
NotCainNorAbel: heavy cut and fast, weeeeee
Strebenherz: I was curious if the game would allow goofs like this. I'm extremely happy it does
ghyllnox: F
RealGamerCow: New blank!
ErynTzun:
CTRL Z
ratbabyonline: simply add more metal on top
Mathwyn: Welp thats the 70mm one now
ladyjessica: I just wanted to let the chat know that when my bestie heard the lathe standing up for itself joke she guffawed for a good minute.
betweenmyself:
thatโs why I told you to buy the combination Milling Machine/3D Printer
Natural_Ones_Only: Smaller depth, Lower Feed, Higher RPM
ratbabyonline: remember: always start the tool while in contact with the material
ErynTzun: Sneak up on the dastardly metal block
r10pez10: if you think about it too hard this milling machine runs on electricity
ratbabyonline: is there just like. a polishing head?
r10pez10: if your feeds and speeds are all correct you shouldn't need a polishing head --b
ratbabyonline: im learning wow
ErynTzun: Is that water supposed to hit the block so it doesn't make the fire?
Natural_Ones_Only: Is this a game or homework
betweenmyself: slowly flooding the workshop with that drip
r10pez10: basically
ratbabyonline: sneeds feeds and speeds (formerly chucks)
ladyjessica: every good workshop has a properly fitted floor drain.
RealGamerCow: Bronze
swordfishspyke subscribed at Tier 1. They've subscribed for 65 months, currently on a 65 month streak!
LRRbot:
Thanks for subscribing, swordfishspyke! (Today's storm count: 34)
r10pez10: it'd be really funny if you could machine something in this and export the model to be 3D printed
Gekyouryuu: oh, wow, funny coincidence: i work in a warehouse, and the next unit over in the building was a place like this for the past few years. they just closed up and finished moving out a week ago
Strebenherz: I think the puff of smoke came out while you weren't doing anything earlier
wolphiron:
It's an Alex
Natural_Ones_Only: try lowering the feed rate?
arcaneIllumination: Iโm going to be honest: Iโm not really understanding or even really paying attention to the stream. I just enjoy hearing Alex muttering and figuring things out in the background of whatever Iโm doing.
Juliamon: arcaneIllumination valid way to enjoy the stream
ratbabyonline: @arcaneIllumination thats whats so great about this stream
betweenmyself: the rings are how you determine the age of the metal youโre working
Natural_Ones_Only: Above the direction controls
r10pez10: arcaneIllumination that's most of what i enjoy about machining youtube
TehAmelie: i think i'm in the same boat. all the technical terms are just like "milling milling milling milling"
OldUncleDan: Right below Axis controller. Feed(m/min)
2Flower: I just like hearing people talk about technical things they enjoy.
wolphiron: Whatcha making?
DoodlestheGreat: Does the job require a surface of a given quality?
wolphiron: Cube boi?
ArtDecoSunburn: @betweenmyself I assume alloys have tricky knots and resin stains?
ErynTzun: Irregular cube shape, harder than it looks.
Juliamon: The game instructed us to make a 'cuboid'
DigitalSeahorse:
cuboid 
wolphiron: Those rings are fun!
Strebenherz: does the game let you mill a thing without the clamp on?
TehAmelie: a ribbed cuboid!
wolphiron: Aww but I like the spirals
r10pez10: damn, no fly cutter
wolphiron: @TehAmelie Ribbed for our pleasure
RealGamerCow: Oh it has the feed speed
Mathwyn: Did blueprint specify an end mill?
Manae: Is coolant an option?
shendaras: Are the values here the ones in spec? If so, I think our feed rate is high.
paperstew: I'm curious how far can we push this? Can endmills break? Can we face off the top of the vise?
LordZarano: Feed 0.094-0.158 and we're at 0.6
Natural_Ones_Only: The Feed Rate is on the top mid right
Natural_Ones_Only: Our feed is way too high rn
shendaras: Revs is also high too I think?
betweenmyself: @paperstew can we get the local government to come shut us down for pushing things too far?
Nigouki: only now it comes to me, but did you bring the Machinist Handbook for all the proper feeds and speeds?
Natural_Ones_Only: We might melt the copper with too high rpm
Manae: 2000 for a 4" tool is somewhat high probably
ratbabyonline: im giving her all shes got captain! she cannae mill any more!
wolphiron: Do you think there's instructions in the game?
ratbabyonline: can you start a fire in this game
Nigouki: chewable material
wolphiron: Is there a polish head? To smooth the surface
Natural_Ones_Only: Oh the bit is going red
paperstew: Proper feeds and speeds for bronze are all over the place. There are way too many varieties.
OldUncleDan: Hey! If it was good enough for the Babylonians, it's good enough for us!
Manae: Tellurium Copper is so much nicer to work with
RealGamerCow: I wondered about using copper but figured you know a lot more than me
ratbabyonline: its fiiine coolant is on
JKBalch: Can we be Ea Nasir for a run?
2Flower: Ea-Nasir would be proud.
ghyllnox: And now it's aaaaaalll hot
Natural_Ones_Only: Welp finish seems pre-set for the tool to be shit
Strebenherz: they MADE nuclear bombs.. WITH LATHES??
wolphiron: Cooper is a nice color
Nigouki: what did they end up adding? gallium? to make the cores actually workable
wolphiron: *copper
Natural_Ones_Only: 095
DigitalSeahorse: same with the demon core?
ratbabyonline: lathing the demon core,,,
gnyrinn: Plutonium metallurgy had to be thought up from scratch.
betweenmyself: @wolphiron I believe there were some Youtube links included with the tutorial prompts, but no idea how granular those would get
xantos69: I mean... what else would you use?
Strebenherz: I love that after all the wild wtf facts i'm still learning wtf facts about nuclear history
Sethalidos: could you make a functional sword with a CNC or lathes?
ratbabyonline: @Sethalidos out of nuclear material?
OldUncleDan: Not with THAT attitude.
Manae: My favorite was reading about the lathes they used to make the interrupted threads for battleship breaches
Natural_Ones_Only: @Sethalidos Yes? It'd suck
Mathwyn: It was point 094 right?
DigitalSeahorse: would this game let us make a demon core?
ratbabyonline: coolant on perhaps?
Omthebox: Me when I'm an eldrich being "were just going to keep sneaking up on this dimension here"
Sethalidos: @ratbabyonline well now that's the question
niccus: the more you work it, the farther it gets from criticality. it's very safe!
pixl_nix: So, how accurate is the sim so far?
ratbabyonline: how explosive are plutonium shavings in the air
wolphiron: Pity I want food and the TV is in a different room from the stove
Natural_Ones_Only: Maybe running a finish mill over the top would fix the finish
Manae: Conventional scoops out, climb goes in
Mathwyn: @wolphiron o7 Welp starving to death is the only option
Natural_Ones_Only: What're our tolerances?
ratbabyonline: how fast can we go
xantos69:
50 Bits
Dalrint: So si this like an incrimental game?
wolphiron: You should just mill until you have a teeny tiny cuboid, lol
ErynTzun: That reminds me the US finally stopped making pennies in November of 2025. Though they were 97.5% zinc and only 2.5% copper. What will I do with my bank of riches!? Continue to forget I have any probably.
wolphiron:
@Mathwyn Lol, thaaaaaanks 
Natural_Ones_Only: YOOOOOOOOO
paperstew: Does this sim care about the difference between climb and conventional?
ratbabyonline: intimidate the copper
TehAmelie: i hear it was only the zinc lobby that wanted them to keep making them the last 30 years or so
Manae: Facing like this, I'm not sure you can distinguish between climb and conventional
Natural_Ones_Only: Hubris?
wolphiron: @TehAmelie Nah, it's bc someone wants to distract us from being in the Epstein files. Why do you think Iran is being invaded?
paperstew: Yeah, right now it doesn't matter. I just want to see if the table will jump around if we try climb cutting
Nigouki: "Please let us not blow past our dimension." - machinists and sliders
trainpants: I've never done any milling, but I've been watching someone on youtube machine a model steam locomotive for the past two years so I'm basically an expert
wolphiron: Cut a circle into the middle
Natural_Ones_Only: Can we unlock the vise while we're cutting
NotCainNorAbel: I wonder if it lets you do a scratch pass
ratbabyonline: @Natural_Ones_Only i see you also are inspired to attempt violence with these types of game
WannabeSmoky: Do a challenge where you only use the lathe
Natural_Ones_Only: You uh went up
wolphiron: Imagine inhaling all that good copper dust
Sethalidos: Is there a cheevo for managing to destroy the machine?
Gekyouryuu:
and which of these lathes lets is use our grist to make stuff to try and beat Sburb? 
Strebenherz: no claim challenge!
Strebenherz: clamp^
ratbabyonline: does raising the head not add more material on top
DigitalSeahorse: remember to wear your goggles
ratbabyonline: @Strebenherz no clamp? what am i supposed to do without my chobits!
Natural_Ones_Only: @Sethalidos There's one for breaking a tool
schordash:
i love alex streams, because it's like having bob ross asmr but he's saying the most outta pocket calibrations and critical errors 
wolphiron: Might need to move the block from under the mill?
RealGamerCow: Nyang
Natural_Ones_Only: I think its a set animation
Strebenherz:
@ratbabyonline
DigitalSeahorse: nuuuu
Mathwyn:
ghyllnox: o7
Natural_Ones_Only: get hubris'd
empyreon:
ErynTzun: RIP
trainpants: hubris
thebuzzstreams: you drilled too close to the sun
OldUncleDan: Question: Why is Z the up/down Axis and not Y?
bigevildan: cubris
DigitalSeahorse:
Natural_Ones_Only: Now give the vise a shave!
JKBalch:
pixl_nix: At least you don't have to clean up all those chips
wolphiron: @schordash Also less squirrels. Bc I never forgot the squirrel who threw an acorn with a BAM bc someone was trying to take a picture of it.
Strebenherz: how accurate to irl milling is the grief stage?
Manae: Surface roughness makes fools of us all
ErynTzun: We're n00bs this is our chance to mess up where it doesn't matter
JKBalch:
DigitalSeahorse: we're learning
ratbabyonline: quick mill the rulers down!
RealGamerCow: That edge finder fuckin lied
ErynTzun: I know because of my learnings
Natural_Ones_Only: This game recommends 16GB RAM????????? W
Natural_Ones_Only: hat
Nigouki: look at all the background textures, gotta fit that somewhere
gnyrinn: We didn't screw up, we're just doing this on a very cold day. That's what we'll tell the client.
ErynTzun: 16GB of RAM is a pretty common requirement fora game
mommahelly: Wait, am I confused isn't it let's nope night?
RealGamerCow: The first cut after zero has been hecked, but all subsequent cuts have been accurate. E.g. after the first cut, going down 0.5 would cut 0.5
Natural_Ones_Only: Can we raise the table?
Juliamon: mommahelly it was a W+P night, but G's out
wolphiron: Did y'all see Steam Decks raised in price? Bc 16G of RAM reminds me of how it's sometimes easier to buy a dedicated gaming console
WannabeSmoky: @ErynTzun when I were a lad we had 2MB RAM and we liked it
ErynTzun: Minimum is 8GB recommending 16GB, that's not too bad.
mommahelly: @Juliamon Ahh okay thank you!
Juliamon: wolphiron It was reported on Checkpoint
Strebenherz: every 4th lets nope is w+p yeah
wolphiron: @Juliamon Good to know! Bc I've been skipping it lately. I should watch them again
DigitalSeahorse: xD
schordash:
Grumpingtoon: @strebenherz very
ratbabyonline: YEAH TEACH, well we wont have THE TEACHERS EDITION OF THE TEXTBOOK EITHER
ErynTzun: @WannabeSmoky The first computer that I was allowed to use had 8 KB of RAM. :]
DigitalSeahorse: they probably say now "You won't always have your cell charger with you."
UnknownFriday: To be fair, they couldn't really have predicted the rise of cell phones and smartphones the way they have.
2Flower: Is this gleaming the cube?
Grumpingtoon: Hoooo man thatโs some hogging out of material
Mathwyn: This kills the cuboid
Juliamon: they come off FOR A REASON
Manae: Quick websearh suggests 100-800 rpm
ratbabyonline: its ok i need it for my rube goldberg machine. the mill makes my breakfast you see
Manae: so 600 seems fine
wolphiron: How much can you cut off at once?
ratbabyonline: @Manae actual results or ai summary.
Grumpingtoon: Whatโs the material?
RealGamerCow: Bronze
Natural_Ones_Only: Bronze
MAPBoardgames subscribed at Tier 1. They've subscribed for 104 months!
MAPBoardgames: Do you get bonus points for breaking the bit?
LRRbot:
Thanks for subscribing, MAPBoardgames! (Today's storm count: 35)
schordash: "sometimes, there will only be USB mini B cables"
ghyllnox: Bronze
Juliamon: The tutorial chunk was bronze, I don't know if this also is?
Strebenherz: i think you did bronze
DigitalSeahorse: how gummy is bronze?
ratbabyonline: i thought it was copper not bronze
Natural_Ones_Only: @DigitalSeahorse yes
DigitalSeahorse: hehehehehhe
empyreon: yessssss
Nigouki: "not 100% copper"
betweenmyself: wonder if there are any glitches that allow players to complete the jobs way faster than intendedโฆ I wanna see this game run at GDQ
Natural_Ones_Only: Tools say copper though
DigitalSeahorse: Alex, never change
ratbabyonline: draw a whole comic on a copper sheet in this game
RealGamerCow: What a blockhead
MAPBoardgames: Just a shave
paperstew: Bronze. And there are many, many types of bronze. It could be easy to cut it could be the worst thing you can imagine
ratbabyonline: make several copper sheets and you can bind them into a folio or book!
DigitalSeahorse:
Sethalidos: thought it was copper hence all the Ea-Nasir jokes
wolphiron: Whaaaa there's a face on the cube!
Juliamon: silence on the back pass
SquareDotCube: Sometimes you do have to wonder if what you are doing is better suited for a stamping machine and not a milling machine
Mathwyn: @ratbabyonline ooh! ooh! Then we can inscribe it with eldritch symbols!
DigitalSeahorse: Spring Pass: You've got full access to Maker Space for the Spring season!
ratbabyonline: @Mathwyn yessss YESSSSSS
Mathwyn: Don't you need 85mm?
schordash:
ratbabyonline: -7 what could go wrong
Manae: 0.06 to 0.10 mm per tooth for bronze, says Haas
wolphiron: took off 0.1mm
ratbabyonline: @SquareDotCube what *IS* a stamping machine
RealGamerCow: Last time the edge finder was way off
ratbabyonline: im picturing a large boot on a spring but surely thats not what a stamping machine is
ErynTzun: @betweenmyself Speed Run No Glitches no On Fire.
DigitalSeahorse: wat
fiinnnaaaaannnnnnnn: now I understand why custom keyboard metal cases take six months and cost so much
ratbabyonline: about to mill the mill
SaxPython: Any% - OSHA Violation
Mathwyn: Alec gonna hand the client a pyramid and shrug
ratbabyonline: mm fresh bronze bonito
Sogheim: this is like telling my barber to take it a little shorter
wolphiron: Making French fries
RealGamerCow: Yeah the edge finder is a fuck
pixl_nix: Welp
schordash:
Nigouki: are we edgefinding the wrong axis?
ErynTzun: @fiinnnaaaaannnnnnnn Plus how expensive the metal itself is if it's one solid part
Grumpingtoon: Are you letting the edge finder do itโs auto-touch?
Manae: I think you are zeroing after it retracts, but that doesn't make sense for going deeper than you want
SquareDotCube: Alex maybe relative might be the difference you're looking for
ratbabyonline: dont we need 90 on this one
fiinnnaaaaannnnnnnn: @ErynTzun oh that's always the cherry on top, keeping track of mining futures to find out if ordering a case later in the year will include a price increase
ratbabyonline: ok phew
DigitalSeahorse:
RealGamerCow: -15 to start?
wolphiron: That is a beautiful onomatopoeia
NotCainNorAbel:
dial it in
schordash:
@DigitalSeahorse dear god!
ErynTzun: @-o
NotCainNorAbel: well if you ran that in a shop everyone would know
DigitalSeahorse:
face is peeking
Sogheim: this is bringing up old GD&T memories
RealGamerCow: So that took off 15.440, fyi
Grumpingtoon: Ok that hurt my machinistโs heart. Even in bronze
ratbabyonline: i miss the metalwork section of my college's sculpture building
TehAmelie: i find it funny we considered counting in inches and now we're doing micrometers
spawnofhastur: Did you inherit this machine workshop and are now making a youtube channel about it, Alex?
Weagle: Very very good mention yeah
wolphiron: Try -19?
ErynTzun: Is one measurement type better for this than another?
NotCainNorAbel: you should check out Vintage Machining
trainpants: I love blondihack's videos
ratbabyonline: "oh did you have a mill and such?" no my college had some welding torches and grinders in a ramshackle shed built onto a rotting porch
ratbabyonline: oh and a plasma cutter
Manae: So DRO to -40.8
Seagulyus: @ErynTzun you mean outside vs inside or?
Cptasparagus: Jakkuh (ex-LTT guy) just bought a farm and it has a machine shop in a barn that he's going to put back together
Athelgar: have you been watching Look Mum No Computer
TehAmelie: @ratbabyonline mine had a blacksmith
wolphiron: I'm not a machinist but -18.75 got you close, so I suggested -19
ratbabyonline: @TehAmelie well my college had alex's dad
ErynTzun: I'm just used to mm for measuring computer related things even in the US, otherwise it would be inches.
Athelgar: hes recently milled a custom head for an engine rebuild hes doing
Manae: ABS might be safer to use
wolphiron: Try -19.25?
wolphiron: 0.25 took off about 0.3mm
ratbabyonline: i wish my college had a blacksmithy,,,
TehAmelie: i mean not a great one. basically it was a shack with a big fireplace with bellows and some big hammers
RealGamerCow: So this should go to 85.32?
Grumpingtoon: I have done machining but have been in the design office for a while now so Iโm rusty. Looks like HSS not carbide, probably uncoated. 8 flutes. Given relative size Iโm assuming 100mm diameter. As I recall bronze and copper nickels are around around 80-100 sfm in HSS
Grumpingtoon: standby converting
NotCainNorAbel: A DRO is essentially how you have been using your axis controller; it allows for a ZERO and typically has features like 1/2
wolphiron: Let's slow down to -19.3 now? Go in 0.05 increments?
Manae: Oh no it changes the DRO too
Grumpingtoon: SFM = surface feet per minute meaning how far each tooth moves in a minute
RealGamerCow: You're in inches now, be careful
Lord_Hosk: As I understand it the current meta is take as much material as you can per pass to save on machine hours.
schordash:
BlindProphet32: you changed to inches
ratbabyonline: that looks right go for it
wolphiron: What happened to the zero????
Manae: You jus swapped to ft instead of mm
ErynTzun: Whoopsie doodle
DigitalSeahorse: mm/m?
wolphiron: That was panic mode
NotCainNorAbel: NASA
TehAmelie: at least it wasn't a moon lander
betweenmyself: I prefer to use furlongs in all my machining measurements
UnknownFriday: @NotCainNorAbel Beat me to it.
exeJayce: I actually really like how detailed this is just for a simulation game...
ErynTzun: Some Scientists at NASA
WannabeSmoky: Is this a workshop simulator where you can't cut yourself on te bandsaw?
schordash: i've done it enough in blender to know it can have drastic repercussions
wolphiron: Okay so another 0.16mm so -19.560
Manae: Using the manual control and reading depth on the DRO seems like the way to go
LRRbot:
If you see something funny or particularly noteworthy, make a Clip of it! Your clip could appear in a fortnightly video or be seen at https://www.twitch.tv/loadingreadyrun/clips (Please give your clips descriptive names if you want them to be seen!)
DigitalSeahorse: that's up
JadedCynic:
DigitalSeahorse: no wait it's negative
Manae: 40.83
Manae: too far
Nigouki: officially in "bee's dick" territory of dimensions
Mathwyn: -19.56 you fool!
schordash:
NotCainNorAbel: math is hard, math is hard, math is hard
DigitalSeahorse: fuck
7gorobei: nuts
RealGamerCow: off?
wolphiron: Alex you listened to me before, why didn't you when I gave you the numbers the last time ๐ญ
Manae:
Depends on the drawing's tolerances!
JadedCynic: *zzzzzt!* "Math is hard; let's go shopping!" Lp
LordZarano: Under on all 3, so it's consistent! Perfect!
wolphiron: I math'd for you :c
JadedCynic:
ErynTzun: It was technically Lockheed Martin that effed up but NASA didn't CHECK what measurement unit it was before sending it off to Mars.
DigitalSeahorse: aim for 80 cut?
thebuzzstreams: At the very least, they give you a calculator in this game which is quite a blessing if you're using a single monitor and don't have a calc or phone nearby
wolphiron: @thebuzzstreams Where's the calculator?
JadedCynic:
@ErynTzun gawd, conversion errors; y'ever heard of The Gimli Glider? 
thebuzzstreams: @wolphiron On the top left bar, between Blueprint and Cam1
wolphiron: @JadedCynic Yup! A good story, only bc the pilots were really good
Mathwyn: @JadedCynic Is that where you toss the dwarf?
Manae: Can you zero the DRO with the reset buttons?
DigitalSeahorse: so we DO have a calculator!
wolphiron: @thebuzzstreams TY!
RealGamerCow: -2.7?
thebuzzstreams: Wait... is everyone else just now noticing this? I thought we weren't using it because funsies
wolphiron: Okay so -2.5-0.4
wolphiron: -2.949
wolphiron: If you want exact
Nigouki: i kinda wanted this game to force you to use dials at least once
Manae: I would hate to not have a DRO
thebuzzstreams: @Nigouki evil..... I like it
wolphiron: As long as we don't change absolute zero anymore, my math should be exact
ratbabyonline: id add permadeath
Grumpingtoon: I wouldnโt be surprised if this wasnโt accurate. I plugged this in to one of my old roughing calcs, coverted it and it said cuts up to 12mm would be 388 RPM and somewhere between .5 & .6 m/min
Manae:
I have done plenty of manual machining But we got a new mill a few years ago and now Im spoiled
ratbabyonline: EUGH WHYD YOU SAY THAT
Grumpingtoon: Flood lube not mist
Mathwyn: Roguelite Milling machine simulator
JadedCynic: @Mathwyn Nah, Air Canada was in the process of converting their in-process measurements from Imperial to metric; one night, a flight had its component that automatically measured and calculated the amount of fuel left in the tanks was broken, and there was no spare. so the flight crew and the ground crew took measurements and tried to do the math to work out how much fuel to add for its next leg...they botched the conversions and ran out of fuel over the prairies... (cont)
DigitalSeahorse: WHY is this lathe so close to PAINT CANS???
schordash:
TehAmelie: maybe start out with old hand tools and have to work your way up eh
DigitalSeahorse:
schordash:
Nigouki: the greeeeeed
RealGamerCow: The nut
gnyrinn: This is less than the ridges in the finish.
Nigouki: we must give in
wolphiron: -2.949
NotCainNorAbel: at this point I want to know what tooling you are using for measurement,
JadedCynic: (cont) ... the filgith crew made up for their math fails by pulling off an amazing dead-stick glide and landing at a closed down air force base...in Gimli Alberta
trainpants:
Strebenherz: DAAANG
Manae:
pn55:
thebuzzstreams: CUBE
Nigouki:
Strebenherz: perfect!
JadedCynic:
goat there!
Mathwyn: 1/3 ain't bad!
pixl_nix: Woooo!
Sogheim: for comparison, 80mm is about 10 studs long of Lego brick.
wolphiron: What number are we going for on this side? I'll help math once you calibrate the drill
Mathwyn: "The new guy has been at it for an hour boss. He drew a face on the cube"
wolphiron: 70mm? Okay
RealGamerCow: Take off 10 to start?
wolphiron: Cut a little off to see what the numbers become
RealGamerCow: Maximum piss
wolphiron: -13.401
wolphiron: Creep to that number
Mathwyn: just punch it an go, what could go wrong
wolphiron: @Mathwyn LOL that's my chaotic neutral heart talking
Strebenherz:
DigitalSeahorse: or onto the PAINT CANS
DigitalSeahorse: jeez
Grumpingtoon: Skill issue; donโt stand in the swarf fountain
DigitalSeahorse: LOL
ErynTzun: @JadedCynic I have now that I've read the Wikipedia page on it. holy crap they glided a 767 a fricking heavy onto an occupied converted race course they thought was a former air force base. And no one died!
DigitalSeahorse: swarf
wolphiron: The cut metal doesn't warm you so you need a space heater
A_Dub888: Hi friends, having fun milling about?
wolphiron: -13.401
Manae: Also spoiling me with the 'new' mill: full enclosure
TehAmelie: Swarf and Sprue sounds like a superhero team
DoodlestheGreat: Which sucks? The name or the bits?
Athelgar: i thought you were goign to say they had names like Tetris pieces depending on what kind of tailing they were lol
RealGamerCow: Fun fact, computers in machine shops get absolutely fucked by the oil vapor? I used to have to replace them every 10-12 months
wolphiron: If I'm wrong, you can shame me
Mathwyn: 2/3!
Manae:
DigitalSeahorse: @RealGamerCow interesting
Mathwyn: Shame the last one is borked
trainpants: two outta three aint bad
TehAmelie: that was the tutorial right?
Sogheim: good practice
RealGamerCow: "Here's your cuboid, 85 by 70 by *mumble*"
wolphiron: You can sell it. It has an amazing face on it
DigitalSeahorse: could we use it as a guide if we have more exactly 70 and 80 cuts to do?
Mathwyn: 76.29%
DoodlestheGreat: Can we make it out of choclate?
wolphiron: It said it needs to be steel at the top, so I guess that was our tutorial!
DigitalSeahorse: freemilling
wolphiron: We know to not trust the edge finder now
Mathwyn: Need to reset?
Mathwyn: Back on the previous screen there was a reset button
wolphiron: Yay! Steel!
DigitalSeahorse: mildly
wolphiron: I'll math for you again, we'll make it perfect now c:
thebuzzstreams: could be spicy steel.
SquareDotCube: "no, I'm Remington Steele"
DigitalSeahorse: xD
Manae: Maybe this steel has seen some things and is hardened steel
TehAmelie: Random Steel is the name of my Metallica ska cover band
wolphiron: Try -0.5 to start
wolphiron: Or -1
DoodlestheGreat: "In disguise as a mild-mannered steel, in times of trouble he becomes TITANIUM!"
wolphiron: Wait wait wait!
Mathwyn: Kick-ass steel
wolphiron: It's in Meters, not MM
DigitalSeahorse: "I'm Galvanized Steel"
wolphiron: NVM I was wrong, I panicked, sorry guys
gnyrinn: Is that space heater running? I would have thought this room ran hot enough.
TehAmelie: "i'm Nippon steel"
DigitalSeahorse: "but you can call me Galvan."
SquareDotCube: someone pulls a joke and switches out your steel block for a gallium block
Mathwyn: Gavinized Steel
DoodlestheGreat: When my father worked at Rocketdyne, they had two milling machines specifically designated for aluminum and magnesium, and you weren't allowed to use the machine for the one metal for the other.
TehAmelie: Calvinized steel
wolphiron: Alex can you find the edge with the longest? We should aim for 85 with that one first
wolphiron: Since the others should both be 80
DigitalSeahorse:
@TehAmelie 
Laurence72: I've got a thing, for Galvan-eyed steel, I'd have been married a time back aweel, Where did you come from, where did you peel, where did you come from, Galvan-eyed Steel?
DoodlestheGreat: One poor sode found out why when he tried milling aluminum with the magnesium mill. Can you say "Giant roadway flare?" I knew you could.
wolphiron: Try -10, since we have -20 to turn 105 into 85
DigitalSeahorse: Kalvinized Steel = I'm feeling chilly.
Manae: At least it isn't making you fly cut one side and then flipping to square it up
imreallybored1991: how are you tolerances A=Dawg
Grumpingtoon: Old excel calc says 253 rpm and (forgive conversion) 0.35 to 0.40 m/min feed. Iโd tell you to ramp up the feed until you get gold-blue chips but I doubt it shows heat load
Grumpingtoon: And iโm estimating the 100m cutter
gnyrinn: @DoodlestheGreat I'm assuming he was lucky that day and didn't kill anyone
DigitalSeahorse: imagine if a shop class taught acceptance over tolerance
wolphiron: I'm glad I'm not the one lining up the block
wolphiron: You're doing great Alex!
wolphiron: nooooooOooo
TehAmelie: @DigitalSeahorse Kelvinized steel = molecules falling apart from freezing
wolphiron: Not -10 since it's the 93 edge
wolphiron: Try -5
wolphiron: We're aiming for 85
wolphiron: Yeah -5 will calibrate it so I can get the number you can creep to
Mathwyn: point 094 right?
LordZarano: Check in the tool?
e_bloc: feral hogs?
wolphiron: @Grumpingtoon This person says 0.35 to 0.4 m/min feed
RealGamerCow: Safety squint time
Mathwyn: That wasn't the feed number
Mathwyn:
wolphiron: This isn't real life
RealGamerCow: Nyowm
LordZarano: 0.1
ButButTheJesus: I'm listening while achievement hunting and this is the best audio
KeytarCat: POINT 1
exeJayce: these kinds of extra streams make me so happy to watch, you can really tell that Alex is having so much fun here
Mathwyn: Remember: measure once, cut twice
RealGamerCow: 14 might be too much?
RealGamerCow: Different noise!
wolphiron: @RealGamerCow Weeeeeeeeee
Cptasparagus: what does the coolant taste liek?
DoodlestheGreat: Strawberries!
wolphiron: @Cptasparagus Sometimes it's sweet, which is why pets will drink and die
fraszoid: Manual mill or CNC? Just stumbled in and I'm intrigued.
wolphiron: -19 then
Juliamon: fraszoid Manual, CNC is DLC
wolphiron: -19.290
DoodlestheGreat: @Juliamon Alliteration!
wolphiron: Well, Alex said it: the coolant is actually piss
fraszoid: Juliamon: thank you!
Manae: Swath is exfoliating
DigitalSeahorse: ack my goggles are heating up
Grumpingtoon: Try a finishing pass
wolphiron: Someone clip Alex saying put your face into it?
wolphiron: Me clip won't work
Astramentha: I just got here, are we, like, making something?
DigitalSeahorse: done, for later editing I mean
wolphiron: We making cuboid
wolphiron: -19.290
Astramentha: ahhhhhh ok
wolphiron: You can creep to that number, but it should end there
DigitalSeahorse:
w
Nigouki: fun fact: before they send you to get an MRI they ask you if you've done any metal work before. If you say Yes you have to get an ocular X-ray to make sure the MRI isn't gonna move any mini metal chunks you have in your eyeballs
Astramentha:
@Nigouki Iโm not having fun 
wolphiron: MRI pulls metal out of your eyes is an image
DigitalSeahorse: eep
Juliamon: Nigouki fun fact: I've had to get those x-rays multiple times!
Grumpingtoon: define โgreatโ
Vinewood_OG: Effective
Manae: I'm going to go with "ow"
wolphiron: Wwpwpwpwpwpwp noise
RealGamerCow: @Nigouki I will need to remember that, I have gotten a steel wool splinter in my eye before.
DigitalSeahorse: you'd want your goggles to prevent stuff getting in there
TehAmelie: i was thinking a coating of metal splinters would make you a cool cyborg but i didn't consider MRIs
Nigouki: Juliamon that's how I learned about it. Yay extra x-ray for me!
Juliamon: (my mom was a wire-wrap artist for years and I got a fragment of clipped wire in my eye once)
wolphiron: -19.290
wolphiron: I betcha you use the Y and Z axis to do diagonals
ratbabyonline: does your maker space have mills?
KeytarCat: feed rat....oh
wolphiron: Hooray!!!!
Strebenherz: niiiice
DigitalSeahorse:
wolphiron: Do -10 on the 93
RealGamerCow: Do it
Nigouki: it make sense
Nigouki: let's goooooooooooooooooooooooooo
Grumpingtoon: single pass?
wolphiron: Hmm. I dunno, we can try?
Grumpingtoon: depends on how it simulates spindle loading
Nigouki: huh
DigitalSeahorse: huh?
Nigouki: that's not how math works
wolphiron: Le sigh, okay
DigitalSeahorse: bwat
RealGamerCow:
Grumpingtoon: That tracks for uphill cut, so itโs simulating spindle loading
wolphiron: I guess the cube isn't flat on the bottom of the clamp
KeytarCat: @Grumpingtoon expand?
Strebenherz:
DigitalSeahorse: hehe
wolphiron: Yessssss, cut it uuuuup
Astramentha: o7
Strebenherz: does it let you unclamp?
CaptainSpam: Solid bronze cupholder let's goooooo
ratbabyonline: man the makerspace i was thinking of joining doesnt have a metal shop,,,
wolphiron: Try messing with the other axes?
wolphiron: Cut everything!
Grumpingtoon: @keytarcat The leading edge of the cutting flute is engaging with the pieces with an uphill slope. This induces downward pressure on the spindle. The more aggressive the engagement (depth of cut) the stronger the pull
ratbabyonline: drill hole
wolphiron: Yessssss, using this as an excuse to play before we reset
Astramentha: weโre the BAD BOYS of milling now
DigitalSeahorse: let's eat metal!
Nigouki: will the game let us mill the vise or the table? D:
Strebenherz: I hope so
ratbabyonline: vise needs hole
Grumpingtoon: @nigouki yeah now Iโm game, take out the jaw plates
DigitalSeahorse: xD
RealGamerCow: ART!
DigitalSeahorse:
wolphiron: Oooh interesting house
KeytarCat: that's...what how??
wolphiron: Yessssss
wolphiron: -5 on the 93
wolphiron: Or should we be more conservative and start with -1?
Strebenherz: ph jesus
DigitalSeahorse: heheheheh
wolphiron: Lol, IDK what you're talking about
DigitalSeahorse: ruins the whole machine
wolphiron: -1 or -5 for 93
KeytarCat: It was being slowly ejected from the physics object
wolphiron: Start low, so we can see how much gets cut off
wolphiron: Then we can math the exact cut
Grumpingtoon: Never becoming a physics object is a personal goal of mine
DigitalSeahorse: indeed
wolphiron: I didn't expect to use my brain so late on a Tuesday ๐
wolphiron: -8.652
wolphiron: You can creep at this
DigitalSeahorse: shop math seems different than math math
wolphiron: Wait were we going for 85 or 80?
Cptasparagus: combat math?
wolphiron: Sorry, it's -13.652 if we're going for 80
Grumpingtoon: If too big, bigger hammer. If too small, use big hammer to take someone elseโs blank
DigitalSeahorse: yikes
RealGamerCow: then it runs into a piece of wood
Astramentha: D:
Strebenherz: forbidden beyblade
wolphiron: -13.652
ratbabyonline: game idea: mill simulator but you have to start by building a waterwheel with simple tools and must gradually upgrade from there by using your current equiptment milling more and more advanced mills
Laurence72:
@Strebenherz
DigitalSeahorse: I may have seen a video of that or similar
Nigouki: potential energy is one bad decision away from becoming real violence
ratbabyonline: @Strebenherz ive seen this done with big mill bits and they even added lighter fuel
wolphiron: I hope you don't mind that I'm mathing for y'all. It's fun for me
Astramentha: @ratbabyonline Iโd play the bus out of that
wolphiron: Add the 0.652 to the end!
Grumpingtoon: I love when the aluminum or titanium pieces spontaneously welds to the bit and you can hear the spline shaft crying
wolphiron: Well once you do the initial cut, you can math the amount to get the dimension you want
wolphiron: Hooray!
KeytarCat: And it sounded like the feed rate sometimes introduced error?
ratbabyonline: its beautiful
Astramentha: TWO dimensions? in THIS economy?
wolphiron: I thought it was another 80? Can you check the blueprint?
ratbabyonline: if you hit all dimensions correctly how much of a hole can you drill and still have it in acceptable parameters
wolphiron: Oh I read the 80 2x, my bad!
Strebenherz: is there a word/phrase i could add to a clip to be like "hey jordynne/matt, this is just like a note to self, not for highlights?"
AziraphalesShop: Do we know if you can break a tool?
wolphiron: -5 to start please
DigitalSeahorse:
CUDE approves so far
KeytarCat: feed rate at 10x
wolphiron: -12.928
DigitalSeahorse: so why wouldn't you go minus 7 mm here?
ratbabyonline: @wolphiron we should call you wolphiron alpha the way youre solving math problems
wolphiron: @ratbabyonline TY, but it's bc my dad spent a lot of time teaching me math as a toddler
DigitalSeahorse: wait wat
KeytarCat: feed rate is supposed to be .09-.1
kristian_fischer:
Hello Alex. This game was just MADE for you, huh?
wolphiron: Going less is fine: we can always cut more off later
DigitalSeahorse: I don't get the zero => numbers
ratbabyonline: DEATHLY SLOW
wolphiron: @DigitalSeahorse Like zero-ing a scale. It gives a starting point for the drill
Juliamon: the glacial creep of progress
KeytarCat: yeah, it's suuuuper slow
wolphiron: BRB I go get the rest of my food
ratbabyonline: is that what a mill is supposed to sound like
Grumpingtoon: Ok the sound design is accurate because Iโm doing dishes and wasnโt looking and the last two passes sounded weird to me
Grumpingtoon: This one sounds like mild steel
ratbabyonline: its beautiul
Juliamon: There's a fantastic array of sounds that metals can make
ratbabyonline: now drill a hole for fun
ratbabyonline: aww
Manae:
TheAinMAP:
wolphiron: They better give you 100%
wolphiron: Hooray!
DigitalSeahorse: woo
wolphiron: Wait what?
DigitalSeahorse: now we futz with more than one axis at a time
Laurence72: I was worried he might get docked because the instructions said to be a bit larger than the numbers indicated
Astramentha:
oh shit this getting hardcore 
wolphiron: Hold up, which edge are we starting on?
wolphiron: Okay so 70
wolphiron: Blueprint again
DigitalSeahorse: so I see we should do the widest dimensions first
wolphiron: Okay so 70->62
wolphiron: Y is 4mm off each side
wolphiron: Blueprint please? I wanna see how deep to cut it
wolphiron: I can work with 20
DigitalSeahorse: lol
RealGamerCow: so the shoulder is 11.5 on all 4 sides?
wolphiron: Um I was thinking of -1 to get the depth
wolphiron: And -5 to start to get to the 20
ratbabyonline: drill the vice drill the vice
wolphiron: I'm not visualizing the axis correctly, can someone please translate into x/y please?
ratbabyonline: end mill the vice end mill the vice
ratbabyonline: i prefer an unintelligent machine
Laurence72: No, it does exactly what you TELL it to, which is much worse than what you WANT it too =P
Nigouki: it does exactly what you Tell it it, not necessarily what you Want it to
wolphiron: Okay, start with -1 and -1 on 2 axis instead of only 1
Cptasparagus: the end mill knows where it is by eliminating everything where it is
Laurence72: @Nigouki jinx!
Nigouki: Laurence72 jinx! :V
ratbabyonline: theyve got those sewing machines with all the computery bits now and they bother me
Laurence72:
Grumpingtoon: @cptasparagus 10/10 no notes
wolphiron: Then we can change to -1 and -2, then figure out which axis is which
Strebenherz: @ratbabyonline an old sewing machine is plenty capable of stabbing me without terminator running it kthanks
ratbabyonline: @Strebenherz im trained on industrial sewing machines, those things are POWER TOOLS
wolphiron: Programming a sewing machine to auto embroider letters is fascinating
Strebenherz: @ratbabyonline oh damn
ratbabyonline: @Strebenherz those things can pierce bone
wolphiron: But I still end up going back to hand sewing and stabbing myself the old fashioned way
Cptasparagus: @Strebenherz theres a sewing machine thats programmed by a Gameboy Color if thats more your speed
KeytarCat: feed rate?
Strebenherz: @Cptasparagus that sounds neat
Grumpingtoon: @ratbabyonline Juki POWER
wolphiron: We go -20 right? So...
Nigouki: that sticker about "This machine does not know the difference between flesh and metal" is still perfectly applicable to all machines today
wolphiron: -19.398
Strebenherz: @Cptasparagus a bit of sarcasm on prior comment pardon. a bit of machinery/computer def has uses
wolphiron: Same dimension, yeah
Cptasparagus: @Strebenherz oh know I get you, my mom has a $27,000 sewing machine and I'm honestly baffled as to why
ratbabyonline: @Cptasparagus w-what on earth is she using it for
Grumpingtoon: @cptasparagus You sure itโs not a multi-head quilting machine?
DigitalSeahorse: is everything in mm there even after the > ?
wolphiron: Oh it's not yet 50! Sorry I read the wrong measurement
wolphiron: What is it again? 50 something
Cptasparagus: quilts, embroidery, probably everything. Being retired and sewing all day.
LRRbot:
If you see something funny or particularly noteworthy, make a Clip of it! Your clip could appear in a fortnightly video or be seen at https://www.twitch.tv/loadingreadyrun/clips (Please give your clips descriptive names if you want them to be seen!)
Nigouki: $27k sewing machine better be able to do elaborate pattern stitching while joining leather to fiberglass, otherwise I don't see the price being worth it
ratbabyonline: @Grumpingtoon i was just suspecting long arm quilter but even those are more $5-15k
KeytarCat: This one should be 50. marked as a 70-20
wolphiron: Okay, measure the other? The -1 side
Cptasparagus: @Nigouki I think its a Bernina B990
Grumpingtoon: @ratbabyonline Iโve seen automated ones that can do up to 10โ wide that run closer in to $20k
wolphiron: 1.378
DigitalSeahorse: so how much off each side
wolphiron: You wanna -4 from 85, right?
ratbabyonline: @Cptasparagus wait hold on. is it a sewing machine or is it a Sewing and Embroidery machine because those shoot way way up in price
ratbabyonline: @Grumpingtoon yeah but even those are wild for a hobbiest to own
wolphiron: -1 = -1.378 taken off
DigitalSeahorse:
wolphiron: Sorry thinking aloud
Grumpingtoon: Ah, high end embroidery machine
wolphiron: -3.622 = -4
Nigouki: "Experience pinpoint accuracy with the Bernina Placement Scanner, integrated camera, and Pinpoint Laser, allowing you to preview and position every stitch and design with confidence. The automatic needle threader, WiFi connectivity, and built-in Help Center make setup and learning effortless, while the Bernina Integrated Stitch Regulator (BISR) brings flawless stitch control to all quilting techniquesโincluding ruler work."
Nigouki: you know, looking at the embroidery example and my mom used to make waaay more complex stuff while manually running a simple Singer
Grumpingtoon: @ratbabyonline Iโve seen exact 1 and it was in a friendโs house. Her mom was a huge quilter and had a whole room dedicated to that machine. It was her retirement present to herself
wolphiron: Wait why are we taking off -11???
KeytarCat: Blueprint, please?
wolphiron: I thought it was -3.622
CWaltz86: is that stuff coming down the side supposed to rep oil?
DigitalSeahorse: oh
wolphiron: Oh.
ratbabyonline: dont get me wrong the embroidery machines that can do a computer file into a design are fantastic, its all the bloatware and prorietary crap they cram in that bothers me
Grumpingtoon: @ratbabyonline preach
Cptasparagus: @ratbabyonline yeah I have it set up so she can remote in from anywhere and process designs while travelling because its so locked down
ratbabyonline: im jealous of the embroider at my work hes got like 4 cpu controlled multi thread embroiders and his own office
CWaltz86: oooh okay ya im used to oil in a drill press (though ive seen people use spit in a pinch)
wolphiron: Undo undo info
wolphiron: *undo
Anubis169: ratbabyonline: I managed to get my hands on an old version of one that has a batch converter in it a while back
DigitalSeahorse: LOL
ratbabyonline: @Anubis169 ooooh
Anubis169: it's backed up in like 5 different places 'cause it was the last one which didn't phone home
Grumpingtoon: And yeah Alex. Itโs usually a mix from a base oil that you dilute to material specific and flood v mist ratios
Anubis169:
no way am i losing that
DigitalSeahorse:
just hit undo and redo until it's perfect!
wolphiron: -11.122
PanPaladin subscribed with Prime. They've subscribed for 25 months!
PanPaladin: Material Science!
LRRbot:
Thanks for subscribing, PanPaladin! (Today's storm count: 36)
Anubis169: whatcha trying to mill?
CWaltz86: @DigitalSeahorse just like real life
wolphiron: The 11.5 threw me for a loop, I had to do math slow
wolphiron: @Anubis169 Cuboid
DigitalSeahorse:
wolphiron: Well, cuboid into a snout
Anubis169:
oh who'd ever do THAT 
wolphiron: I appreciate not waiting to see how much we milled off
CWaltz86: nothing worse than a broken bit
DigitalSeahorse: or if you nudge the handle ever so slightly it makes a not straight cut
wolphiron: @CWaltz86 Shake Hands with Danger
Anubis169:
if you do move the block through the tool mount, it does show commitment to the bit
Grumpingtoon: November?
DigitalSeahorse: I see a lip
ratbabyonline: oh people here would know, can you use lighter fluid to remove glue from a soft rubber surface without damaging the rubber
wolphiron: I think I math'd right, but yeah, please take my -11.122 with a grain of salt
DigitalSeahorse: I always press both C and CE more than once cause I never remember which one full clears
wolphiron: Hold up
Anubis169: ratbabyonline: I wouldn't like to chance it
Anubis169: you'd probably be better off with soap/water and a mildly abraisive dishcloth
wolphiron: I'm so confused with what's going on now
KeytarCat: I would not do the calculations Alex is doing, but I think we're getting the same answers
wolphiron: You're doing great Alex! You don't need me to be a calculator anymore (which is good bc I'm lost now)
KeytarCat:
I'm also not an actual machinist
ratbabyonline: @Anubis169 tragically that hasnt worked
Anubis169: ratbabyonline: If soap doesn't work, white vinegar
KeytarCat: what's the shoulder measure?
KeytarCat: yeah, but is it?
Anubis169: or something with baking soda in it, it's abraisive enough to remove glue and not damage rubber
wolphiron: Curse those Americans and their imperial machines
NotCainNorAbel: Thousands of an inch
DigitalSeahorse: negative in fractions would confuse me even more
ClodiumSoride: Check the height of that second step? There's a bit of a lip.
Grumpingtoon: @anubis169 Any glue on a rubber will be another polymerized compound. you need something that will denature the adhesive without devulcanizing the rubber. white naptha or lighter fuel is a cheap denaturalizer
Grumpingtoon: No machinist in the US uses fractions. All thousandths of an inch
wolphiron: No more math from me, I can't read the blueprint and don't understand what numbers we need anymore. Sorry folks
ClodiumSoride: Look closer to the side away from you, there's a bit of a step on the lower face.
Cptasparagus: the game really wants you to start cutting eh
Anubis169: Grumpington: I'm mostly going from my experience accidentally messing up a rubber O-ring with isopropyl alcohol one time
Anubis169: the best sparkly cooling water simulated on Twitch
Grumpingtoon: @anubis169 Thatโll do it. got dull then brittle?
wolphiron: Lol this exactness with the dimensions is making my head hurt. Give me something I can shape myself, instead of doing sculpting (re: removing material to get what you want), and I'm golden
Anubis169: and super flaky
Anubis169: so i've not messed with stuff that denatures glue quickly on rubber since
Astramentha: what does proud mean in this context
LordZarano: Nice.
ratbabyonline: whoops ive been using isopropyl and it hasnt damaged the rubber,, yet
wolphiron: -11.122 for x, I think.
KeytarCat: It was proud, then you zero'd to it ๐
DigitalSeahorse: Anubis169, I thankfully remembered not to oversaturate my elastic physio bands in isopropyl alcohol
Grumpingtoon: @ratbabyonline you sure you havenโt been using neoprene?
Anubis169: get some water on that, ratbabyonline
e_bloc: interesting
ratbabyonline: its unclear. its the printing pads for a silk screen press and the manual doesnt say what it is
Lord_Hosk: What is that... half an inch? You can take that off in a single pass with no cooling juice
e_bloc: happy pride
DigitalSeahorse: just a light quick wipe that would dry instantly
kristian_fischer: My insomnia is currently offering patrons one more hour in the ball pit.
e_bloc: you lost me at dead nuts dimension
Cptasparagus: Fall is still a few months after pride tho
Astramentha: ๐๐๐
Grumpingtoon: @ratbabyonline I think neoprene is more resilient to alcohol, depending on the denaturing agent
ratbabyonline: @Grumpingtoon i have truely no idea
wolphiron: I scrolled up to get x= -11.122
schordash:
oh hey shit~ yeah you right
e_bloc: oh like dead on balls accurate
DigitalSeahorse:
happy pride! 
ratbabyonline: @Grumpingtoon whatever it is, its heat resistant
wolphiron: Got exact measurements = my nuts are dead
Grumpingtoon: **math is magic**
Lord_Hosk: you missed a decimal
e_bloc: its an industry term
wolphiron: You forgot the decimal
LordZarano: Also, wrong axis
imreallybored1991: alex u are agigachad sigma al pha ohio based
KeytarCat: It's funny being an autistic linguist. So many phrases are just "yeah, that probably means the same as another phrase I don't understand" and I'm right
Lord_Hosk: 0
Lord_Hosk: 0.69 not .69
DigitalSeahorse: undo the other
Grumpingtoon: @ratbabyonline probably some kind of synthetic then. Natural rubber is much less forgiving with repeated heat cycles
DigitalSeahorse: so close yet so far
Grumpingtoon: also RIP
Anubis169: off by 0.001
DigitalSeahorse: ^
Nigouki: fourty-NEIN NEIN NEIN NEIN
wolphiron: Undo, it'll be okay, you're only off like Anubis days
LordZarano: Hit undo redo. see if it corrects
wolphiron: *said
Anubis169: definitely
Anubis169: and way less expensive
DigitalSeahorse: undo and now it's perfect!
wolphiron: The undo is life changing
LordZarano: Cause it did last time!
e_bloc: definitely not a luxury you get in real life
KeytarCat: you hit the up arrow on Z
wolphiron: You know the worst part is, if I was playing this game, I'd draw everything onto paper and put all the math onto the paper ๐
KeytarCat: button dimensions and mouse precision got yopu
e_bloc: I need protection. from myself, mostly
DigitalSeahorse: or to move the UI so the x and y are out of the way
Anubis169: wolphiron: This is just a personal habit, but i don't like using a calculator on my phone. I much prefer a physical calculator with buttons. Helps me think better
Anubis169: always got it in arm's reach
wolphiron: Oh, I'm used to doing the math in my head
wolphiron: If I write the numbers, I can find the difference with whole numbers
e_bloc: a manual calculator is so handy imo because I'm usually using whatever screens I'm adding things together from
Anubis169: Yeah same, but i work with pi a lot
e_bloc: but I mean I'm an accountant
wolphiron: I'm trained in computer science and engineering
Grumpingtoon: @anubis169 This is the way. I have my TI-89 at my desk along with a big button account calc
ProcyonFlynn: what is it weโre trying to machine? Or just chasing zeros?
e_bloc: I like big calc, but I draw the line at the ones that still print out on paper
DigitalSeahorse: the axis needs an undo button too
Juliamon: ProcyonFlynn A stepped cuboid
Juliamon: like a big unpushable button
wolphiron: Anyways. The reason why you saw me math before is bc I played a lot of pet sites and would add to my bank account so I had ending zeros. But to do that, you need to math from the interest you just collected, which is never a nice round number
ProcyonFlynn:
Ah, to go with the immovable object 
Anubis169: hehe, this isn't anywhere near as fancy as a graphing calculator Grumpington, though it does have a display that alters the size of brackets depending on what's in 'em
Grumpingtoon: @e_bloc yeah that will get you shot in any design & engi office and i work at home and like my spouse. No ticker tape
DigitalSeahorse:
cube steppy
Anubis169: it's a sky blue Casio fx-83GTX
AziraphalesShop: And then we shove a giant socket on it
wolphiron: Making a smaller cube on the bigger cube, to rough out the shape the blueprint demands
Anubis169: the classwiz ones they recommend for sysadmins
DigitalSeahorse: do we want to cheat and look at a clip from before this happened?
Anubis169: (before sysadmins find out being able to do hex in your head doesn't have an IRL application in an entry level job)
DigitalSeahorse: if anyone took one
Grumpingtoon: So long as itโs multi-line. I barely use any of the graphing functions but there are a few programs still in there I wrote like 20 years ago that are useful so I keep the graphing calc
wolphiron: @Anubis169 I don't need to do hex in my head, I just need to know how to divide by 16
DigitalSeahorse: just undo a bunch of times
Anubis169:
ClodiumSoride: Maybe use that uncut edge to get the Z axis positioned, then go back around to this face after?
wolphiron: Also I don't know where my graphing calculator went, so I either use my phone calculator app or do it on paper for myself
e_bloc: who hasnt been there
wolphiron: This isn't fun anymore, I just want to math cubes please ๐๐๐
ClodiumSoride: If I understand correctly, maybe you can use the DRL in REL mode to move down 1 or .1 or whatever fraction you need, so you don't have to do math on the arrows thingie.
Juliamon: I only just noticed that we're nearly at 8pm already
wolphiron: @ClodiumSoride Oh! Relative mode! Smart!
Anubis169: yikes, thank you Julia
Anubis169:
it's 3:40am, i gotta jet
Juliamon: You can go as late as you want of course, but I don't know if you have travel accommodations that are time-dependent
DigitalSeahorse: I'm totally lost on the numbers on the axis thingy so doing better than me
Juliamon: first try
wolphiron: Alex, our not-salt mentioned relative mode
LordZarano: And now zero Z there
DigitalSeahorse:
ClodiumSoride: Move the X axis down juuuuuust a bit
Cptasparagus: "ive gotta clean this step off" uwu
DigitalSeahorse:
just eyeball it
wolphiron: @Juliamon TY for the reminder, I was able to take some melatonin before it got much later
wolphiron: Zooooooom in
Nigouki: "this one small step"?
wolphiron: One small step for Alex-kind?
DigitalSeahorse:
it's a step for an ant
ClodiumSoride: Can you measure the side of that step, to get the total width to the other side of the cube? I don't know if it's too small to focus on.
DigitalSeahorse: fffffff
DigitalSeahorse: wait
LordZarano: -9.187 is what Z was at
wolphiron: :C my condolences
ClodiumSoride: Use the DRO with the number LordZarano said
wolphiron: ^ try DRO with relative, was what they suggested before
wolphiron: You're currently on DRO absolute
wolphiron: Absolute might mean more math
ClodiumSoride: I think ABS to use the number that LordZarano remembered, then switch to REL.
wolphiron: If we want to torture ourselves, we could undo everything and start from the original cuboid ๐ญ
wolphiron: I mean from the start of step 2
DigitalSeahorse:
@wolphiron 
DigitalSeahorse: haha!
wolphiron: Haha! I outsmarted myself - Alex, probably
DigitalSeahorse:
if 
wolphiron: What numbers do you have and want to have?
DigitalSeahorse: oops
NotCainNorAbel:
500
wolphiron: If I have 2 numbers, I can get you the third
wolphiron: @NotCainNorAbel Pride bits???? That's cool
wolphiron: What numbers do you want?
Driosenth: what is the GD&T are you trying to hit?
ratbabyonline: we did so well on the cubeoid
DigitalSeahorse: xD
wolphiron: @ratbabyonline Bc I could get from point A to B, but I can't do the 3D extra dimension
DigitalSeahorse:
just the tip
Driosenth: Spring passes
ratbabyonline: @wolphiron damnb
DigitalSeahorse: wat
niccus: ah, you're machining tiberium
ratbabyonline: steel industry full of ghosts
wolphiron: Haunted by undo's
TheAinMAP:
ClodiumSoride: I think it's not perfectly square, so the width depends where on the face you click.
LordZarano: Feed speed?
DigitalSeahorse: redo undo
ratbabyonline: oh NO
DigitalSeahorse: uhoh
ratbabyonline: OH NOOO
ClodiumSoride: Yes, it isn't square.
DigitalSeahorse: OH NOOOOOOOO
Astramentha: D:
wolphiron: It counts 0.001 but you can toggle 0.0005 bc I think it rounds
Juliamon: oh we TURBO FUCKED
Driosenth: You aint square
lightfut: Dead
DigitalSeahorse: is the bit loose?
ratbabyonline: oh god. check the other sides
DigitalSeahorse: how?
Strebenherz: i had to step away what happened?
Nigouki: and this is where we go to bed and hope tomorrow isn't haunted
ratbabyonline: fuuuuuuu
Strebenherz: i heard like 50 oh nos from alex
wolphiron: We probably weren't perfectly square when twisting
ratbabyonline: @Strebenherz steels haunted
DigitalSeahorse: every edge has circle marks?
Strebenherz: wait WHAT
wolphiron: @Strebenherz The edge is like 70 to 69.997mm
Driosenth: CRASH!
ClodiumSoride: Pierce the heart of the cuboid!
DigitalSeahorse: drill hole right through it
Strebenherz: @wolphiron what how
wolphiron: We're being precise, so this difference when you measure down the whole side really hurts
wolphiron: @Strebenherz Probably didn't put the drill at a perfect 90 degree angle
ClodiumSoride: Smiley face?
DigitalSeahorse: make a face!
wolphiron: Whelp, now we got a face
DigitalSeahorse:
wolphiron:
Pull it up and it'll make a peen
ClodiumSoride: Flawless.
ratbabyonline: yayyy
ratbabyonline: a buddy
DigitalSeahorse:
Astramentha: ๐ซ
wolphiron: Thanks for the fun!
Driosenth: can you leave an apprentice mark on the vice?
LordZarano: Aaand, submit to client
ratbabyonline: imagining this as a play it forward
DigitalSeahorse: !alex
Nigouki: COOL STREAM
Laurence72: Thank you very much for the stream!
pixl_nix: Thanks for the stream!
schordash:
lol thanks for the soothing chaos
ratbabyonline: yayy thanks alex
wolphiron: Lol!
Juliamon: This was extremely cursed and funny
ratbabyonline: great way to unwind after work
ratbabyonline: cam cant stop talking about marathon i think
wolphiron: Did they defeat the zombie hand in Dice Friends?
pixl_nix: Bridge??
ratbabyonline: bridge? damn i was hoping cribbage
Strebenherz:
200
DigitalSeahorse:
TheAinMAP:
Laurence72: Bridge? Has the Friday Nights Exile Zone episode finally come to pass?
wolphiron: I'm so jelly, my app isn't letting me clip RN
DigitalSeahorse:
ratbabyonline: auhg i shouldve saved my sub notice for tonight
wolphiron: @ratbabyonline Does it only work if you share it during the stream?
DigitalSeahorse:
goodnight, all!
TheAinMAP: Thank you for streaming.
wolphiron: Bai
exeJayce: bye!! thank you!
ratbabyonline: @wolphiron no idea
wolphiron: Thanks for the fun!
Nigouki: Thanks for the stream!
ratbabyonline: blue mana voice *MILL*
Reset scrolling
