F1SHOR: ohh no thats like 1 am or something wierd here
F1SHOR: time to set an alarm
Theroastedrooster: i
theaguajardo: is day 2 sealed as well?
Daggothur: so is it like a GP or PT for us boomer?
futtbuckle: oh boy momir is back
LurkerSpine: This is a rough format for sealed though :(
Earthenone: thanks for explaining G!
Theroastedrooster: how much is it?
fcloud: definitely probably
fcloud: :3
djalternative: well, if you do it for a bonus stream, you can buy in more times
F1SHOR: im restricting myself to 2 tries only cause i have the gems doing nothing anyway
diamondmx: Someone, I think Ryan Spain?, said that BO1 was better EV.
eshplode: Wait, we can just play magic?
Theroastedrooster: pvvdr said that
diamondmx: In the open, specifically.
TehAmelie: how many days of daily quests would it take to pay for it, as a point of comparison?
Theroastedrooster: fo the open
RayFK: Play what you want
El_Funko: Is that because you can jam matches faster if you bomb out tho
RayFK: Forget EV
djalternative: Plus, the entry gets you the phyrexian Vorinklex skin I think
GapFiller: thanks for streaming G
F1SHOR: BO3 was better rewards but BO1 was more likely to be successful is what i heard
savorycookie: It's apparently like 5% easier in bo1, but enjoyment makes you play better so it's all a wash
taz8806: it's mostly that newer people will be playing bo1, so you can farm them
El_Funko: oh that makes snese
Earthenone: if anything the better EV one will have the more informed players. making the other que better EV :P
CardKingdom: We're trying! Despite constant weather and issues!
El_Funko: That makes me sneeze
taz8806: but, I think playing the format you're more used to is better
diamondmx: Put it on your dog.
RakdosDragon88: anyone streaming the open
Theroastedrooster: thrust
harrito: Giggity.
vargasbball3: cool thanks for seeing the games you have played today
taz8806: mod the JOYstick
1y1e: but now all the pros will be in Bo1, so Bo3 is where all the emdium players live >:]
Hexi_Lexi: there is no good way to say it, G
TehAmelie: playin around with his hardwar
SFSMaus: Yay for the hang!
GapFiller: bai G&Co lrrGRAHAM lrrKATHLEEN lrrJAMES lrrHEART
GredGredmansson: bye!!!!
TehAmelie: hardware
rand00mtask: That is a powerful string of words
Moonspeak721: is there destiny tonight?
ChrisGMiller: !NEXT
Earthenone: tonight is thrustmaster
LRRbot: Next scheduled stream: Tinker Tailor Solder Fry (Let’s mod a Thrustmaster TMX racing wheel with a better wheel! Game: Thrustmaster Wheel Mod) at Thu 05:00 PM PST (8m from now).
GapFiller: oooh closing credits music
Moonspeak721: oh right he was literally just talking about it duh
GapFiller: this is new
fcloud: ads are telling me not to vape...!
Earthenone: !advice
LRRbot: Learn many!
GapFiller: !badadvice
LRRbot: Avoid the glow.
harrito: !advice
harrito: Womp womp.
NarwhalsInATrenchcoat: @harrito Imma go with... don't forget your skin
RomanianMyEscutcheon: !next
LRRbot: Next scheduled stream: Tinker Tailor Solder Fry (Let’s mod a Thrustmaster TMX racing wheel with a better wheel! Game: Thrustmaster Wheel Mod) at Thu 05:00 PM PST (6m from now).
Easilycrazyhat: XD
DiscordianTokkan: Later Graham!
GapFiller: lrrHEART take care G
DeM0nFiRe: lrrSIGNAL
NightWingMistHawk: lrrSIGNAL lrrSIGNAL lrrSIGNAL
SnackPak_: lrrSIGNAL
Bobtheninjagoldfish: HI FRANDS
Snowcookies: Hello chatty humans
LRRTwitter: @loadingreadyrun> It’s time for Tinker Tailor Solder Fry, and the wheels have come off — or at least they’re going to. Join Ian for a sim racing controller wheel swap and more! http://twitch.tv/LoadingReadyRun 📷 https://pbs.twimg.com/media/EujQfX4VEAE30EF.jpg || https://www.twitter.com/loadingreadyrun/status/1362568128731836419
Bobtheninjagoldfish: how is everyone tonight
RandomTrivia: Hey friends! Time to spin (or not) a wheel! lrrHEART
Bobtheninjagoldfish: and remember there is the bonus racing stream on sunday!
LordZarano: I'm doing good, happy about the successful landing on Mars
DeM0nFiRe: omg I've been moving over the past few weeks and my back has been hurting most days. I thought today I was spared the back pain, but after bending down to get my mail it hurts more than ever lol
NarwhalsInATrenchcoat: @DeM0nFiRe hope it gets better soon
LessIsMorii: Boo urns, moving can be such a pain! Hope yout back feels better soon
DeM0nFiRe: @NarwhalsInATrenchcoat Thanks. I think I only have about a week or so of work left in the move and then can relax for a few days and it should be fine then
Bobtheninjagoldfish: Having to keep an eye on the NA DPC too...
elah806: Ian, why did you put that racing wheel in your mouth?
margieargie: Under normal circumstances I'd recommend strongly getting some sort of help if it's at the back pain level, but right now... well...
korvys: Hi tiny second Ian!
DoodlestheGreat: Greets, Ian!
DeM0nFiRe: Infinity stream!
VmKid: Oh boy it's Infini-Ian
itomeshi: Seeing Ian live in the background is weird...
Arclight_Dynamo: Sound weird for others?
NightValien28: hello Ian, hello Ian, hello Ian
Earthenone: !humanscale
LRRbot: Want a snazzy desk or chair like Ian has? Use the code WFH25-LRR for 25% off at Humanscale through the end of January! https://www.humanscale.com/
RandomTrivia: Uh oh, I spy the Tilty House motto LUL
korvys: Hi tiny-tiny third Ian!
adamjford: sound is indeed weird
SnackPak_: Sweet setup
Earthenone: ohh january, my bad
tangokilo421: I forgot to close the tab after LRRMTG and this just scared the bejeezus out of me. Guess I'm watching TTSF now!
RandomTrivia: Sound is just different. We can actually hear the room
MortifiedPenguins: the sound is a little crunchy
Bobtheninjagoldfish: it's a bit ringy
asthanius: only while talking
adamjford subscribed with Prime. They've subscribed for 75 months, currently on a 75 month streak!
adamjford: Time for me to pay you your Amazon Allowance
LRRbot: lrrSPOT Thanks for subscribing, adamjford! (Today's storm count: 60)
asthanius: When you lifted your hand there, something went wonky
Lord_ZYRK: There's some high-pitched interference
Snowcookies: yeah, I hear a ting ting
Arclight_Dynamo: Left channel is screwy, I think.
Nigouki: oooooooh
Nigouki: that is definitely printer noise
LurkerSpine: Ah. What 3d printer do you have Ian?
adamjford: that is what that noise is
RandomTrivia: Wheel, wheel, wheel! What have we here? lrrBEEJ
Nigouki: gonna be a wheely interesting stream Kappa
ritchards: less buttons?
Texan_Reverend: Hi everybody. I'm so excited for this.
fcloud: blue means go faster
RandomTrivia: *fewer buttons :p
Lord_ZYRK: What are you, American? lrrBEEJ
VmKid: Big Ol' Button Box, ya Butts
ritchards: *lesser buttons lrrBEEJ
Arclight_Dynamo: Labels!
62MGcobra: nice a button box. i am thinking of making one of those as well
Mollylele: lrrIAN_SG lrrIAN_SG lrrIAN_SG
aiamethyst: nice playmat
LurkerSpine: Future TTSF: building a racing cockpit
62MGcobra: have to find a box as i cant 3d print
Lord_ZYRK: Instructions unclear: replaced my car's steering with a trackball
Bobtheninjagoldfish: is anyone elses audio channels cutting in an out at times?
LurkerSpine: It can be collapsible
62MGcobra: ah so there's the trackball for drawing
Mysticman89: I'm sure you could put spreadsheets up on the screens of your cockpit. it's a productivty tool really
Arclight_Dynamo: yeah, sound is 500% fucky.
VmKid: Just convert the Live studio into a motion simulator room. I'm sure Graham and Paul would love it.
DeM0nFiRe: Turn your entire house into one of those full moton cockpits, and then the tiltyhouse moniker will make even more sense!
asthanius: Gotta stream from a faraday cage
RomanGoro: It's weird, but I'm not getting audio cuts
Arclight_Dynamo: When you lean far right it goes weird stereowise, too.
RomanGoro: Just that weird reverb we were talking about
Lord_ZYRK: That's why you rig an elaborate pulley system to raise it into the ceiling
ZombieHendrix: I always wanted a cockpit for mech games
RomanGoro: I don't have headphones, tho
Oghara: !schedule
LRRbot: Want to know what's coming up? Check out https://loadingreadyrun.com/live for an interactive schedule, or http://lrr.cc/schedule for a Google Calendar version.
Arclight_Dynamo: Better, but the stero is still weird.
Arclight_Dynamo: *stereo
delta__vee: silly question: is ian's mic audio usually stereo?
VmKid: lrrFINE
Lord_ZYRK: I can't wait for Ian to bonk his head into that seabatTROG
DrakoniteStreams: therea48Wave I should watch the clock more carefully
Arclight_Dynamo: It really, really is.
LurkerSpine: are 2 mics picking up?
asthanius: Getting weird left-right channels in and out
Mysticman89: theres definitely weird stuff audio wise, but its not experience ruining
redsaint_uk subscribed with Prime. They've subscribed for 37 months!
redsaint_uk: More months, more Amazon monies
LRRbot: lrrSPOT Thanks for subscribing, redsaint_uk! (Today's storm count: 61)
LurkerSpine: there we go
asthanius: Ah!
legiondivided: it made a click sound and sounds better now
Arclight_Dynamo: Oh thank god, that fixed it.
Gen2Gengar: Now it's mono and much better
fcloud: Why is...everything...so wrong?
Mysticman89: this sounds more normal now yes
VmKid: "Oh, the family's all here"
Arclight_Dynamo: I was going crazy, but didn't want to keep complaining and derailing the stream. :D
delta__vee: ^ ;)
62MGcobra: the desk has it's own settings maybe its gone sentient
LordZarano: No flappy paddles on the new wheel
fcloud: flappy paddles? is that like flappy bird?
asthanius: Are there non-flappy paddles?
asthanius: Wouldn't that just be a board?
DrakoniteStreams: stick shifter is so much more visceral than paddles anyways
toomanybears: should
fcloud: "Flappy Paddles" was recorded by Don Ho in 1952
RandomTrivia: Hooray!
Bobtheninjagoldfish: "Should"
Lord_ZYRK: Steering wheel's poppin off over here PogChamp
Texan_Reverend: The shifter can always be switched over to sequential mode which replicates the ease of flappy paddles, if not the location.
Hexi_Lexi: "it should just pop off" is the lie i tell myself about my Magic decks
fcloud: The Unscrewening
DrakoniteStreams: last time I bought a racing wheel, I had to put extra effort in to finding an H shifter instead of just toggle shifting
RealGamerCow: I hope they don't do the sneaky "screws under the feet pads" trick
Driosenth: Ian, I have purchased a keyboard for the first time in my life. I am going to try dailying something other than my Model M.
Bobtheninjagoldfish: thye ony end to hide screws when they dont; want nay screws showing.. that doesnt seem to be the case here
bill_tinn: lrrEFF
DrakoniteStreams: racing wheel manufacturers seem okay with the idea of people modifying them. I suspect it'd be a hard sell to try to prevent modding, given the target audience
RealGamerCow: gears and belts
Kaorti: I dearly wish I could get buckling springs on something ergonomic
Driosenth: I choose the Wooting HE Two, a full-sized keyboard that every key is analog via hall effect sensors.
Arclight_Dynamo: Like, I bought your product. *Why* prevent me doing what I want with it? You have my money.
VmKid: Hot Take: I hate the Mech Keys community's obsession with non-full keyboards. 100%s are way harder to find than they should be.
Arclight_Dynamo: @VmKid Agree.
DrakoniteStreams: @VmKid +1
Driosenth: Hot Take, I want my F13-F24 keys
LurkerSpine: @VmKid I suspect that has more to do with people not having desk space and gaming mouses, than people who use mech keyboards for productivity
mariomario42: but wait, there's more
VmKid: I don't even use my numpad for that much, but I prefer to have it rather than not
DrakoniteStreams: @Driosenth +1 ... shame most input APIs don't even have definitions for them anymore
aerohydra: i really like having a number pad attached, which doesnt seem to be the 'standard'
MortifiedPenguins: where's my f1 through f24 keys
LordZarano: I was about to ask if you had a spudger
Kieza_12 is continuing the Gift Sub they got from LadyMCHall!
Gen2Gengar: AZERTY keyboards make you hold shift to type the top row numbers, so a numpad is necessary for me
VmKid: I don't mind only having 12 function keys, plus perhaps a few macro keys if they want to throw those in and the software's not crap
RealGamerCow: Ian, have you ever considered a "Horner Industries" or other maker's mark to put on things that you mod?
Arclight_Dynamo: I like that when you crack something open, you can tell if it's junk or not. This seems well-made.
DrakoniteStreams: that looks like an option in the casing for mounting an LED thing.. uh.. RPM meter I think they are for?
Driosenth: resistors or flyback diodes?
RomanGoro: !plan
LRRbot: Translator's note: Plan means Keikaku.
Driosenth: those mammoths are resistors,
RealGamerCow: what are the colors on the resistors?
mariomario42: beautiful ferrite ring on that thing
Arclight_Dynamo: Wait, does the cable attach to the wheel by just... plugging into it? With a connector? If so, that's deece as hell.
mtvcdm subscribed at Tier 1. They've subscribed for 77 months!
mtvcdm: 77 months? That's 11 years, if a year lasted 7 months!
LRRbot: lrrSPOT Thanks for subscribing, mtvcdm! (Today's storm count: 62)
fcloud: canadian education
Lord_ZYRK: Ian, you're positively glowing. . . you're not pregnant are you?
DrakoniteStreams: "why am I so bloody bright" ... IQ brag? :P
DrakoniteStreams: do those cables on the back unplug?
LordZarano: bigclivedotcom hasn't taken apart a gaming wheel yet has he? Actually, has bigclive done any gaming devices?
Driosenth: Is this going to be a permanent swap, or are going to install a Quick Disconnect like the Formula wheels?
DrakoniteStreams: LordZarano I do not believe so
mariomario42: oh good, the tie didn't fly off at mach 3
RealGamerCow: So those resistors are probably 183k ohm, +/- 1%
Texan_Reverend: @driosenth A permanent swap. The QDs for this wheel significantly numb the force feedback.
RandomTrivia: Uh oh
hoktauri subscribed with Prime. They've subscribed for 54 months!
LRRbot: lrrSPOT Thanks for subscribing, hoktauri! (Today's storm count: 63)
DrakoniteStreams: the resistors make sense, as every time you turn the wheel it'll cause the feedback motor to generate power that needs dissipating
Texan_Reverend: Semi permanent. It can be changed with this same process.
RandomTrivia: Are we assuming it's not affixed inside the hole?
VmKid: Oh crap
Driosenth: 91.5±1.7 KΩ if in parallel.
mariomario42: this process also works for cleaning a Thanksgiving turkey
Texan_Reverend: It's always exciting around here.
RandomTrivia: @mariomario42 LUL
Arclight_Dynamo: Time to get a long grabby.
Driosenth: skewer?
fcloud: need like a dowel
RandomTrivia: Need a longer poking implement
LordZarano: Chopstick?
VmKid: Got any longer drewscrivers?
SnackPak_: Just like a real car, it's a pain to get to parts
Nigouki: no extra long screwdrivers laying around?
RandomTrivia: sergeChair
fcloud: too late, i already didnt go away
Nigouki: sergeChair
Electrodyne: Hi internet friends! Have we had a hundred "Thrustmaster was my nickname in high school!" jokes yet?
RandomTrivia: Is it definitely not glued down inside?
mariomario42: could you leave the wire in there and just snip it down?
RandomTrivia: Hey there Electrodyne! We've probably covered those over many months but feel free to add to the pile!
62MGcobra: just de-pin it
Driosenth: Only slightly easier than fishing the wiring harness for the indicator column in a GMT400
Texan_Reverend: Take a photo first.
DrakoniteStreams: @RandomTrivia want to take that "longer poking implement" comment again? :P
Nigouki: time to take a photo of the wire layout first?
VmKid: Make sure to make a note of which order the colors are
ZombieHendrix: sideways?
Arclight_Dynamo: Note which colour goes in which pin hole i you're going to push the wires out.
Driosenth: Record the Wire color order before de-pinning
Arclight_Dynamo: *iof
RandomTrivia: @DrakoniteStreams You heard me :p
Arclight_Dynamo: Fine
fcloud: hold on a second! *stooge noises*
davbricar: wrap it in tape to eliminate the corners
Texan_Reverend: Ian, before removing the connector, grab a photo of the wire order.
Arclight_Dynamo: ^^^
LordZarano: ^^^^
VmKid: lrrGOAT
fcloud: EYYYYY
RandomTrivia: lrrHORN
Arclight_Dynamo: lrrHORN
62MGcobra: FBtouchdown FBtouchdown FBtouchdown
LordZarano: lrrGOAT
Texan_Reverend: Huzzah!
RandomTrivia: lrrFINE
Bobtheninjagoldfish: gonna need som estring to get it back through?
DrakoniteStreams: pet peeve: when people don't know the difference between duck tape and gaffer tape. :|
Electrodyne: jlrrBreak
mariomario42: oooo
DrakoniteStreams: (though I suspect Ian has actual gaffer tape)
Texan_Reverend: If it's on PC, games generally let you use the keyboard.
Electrodyne: Pet fun fact: cotton duck inside duck tape
MichaelVYee: Duct tape! Gaffer tape! Etc
RandomTrivia: I imagine Ian has many kinds of tape, including Duct *and* Gaffer
Texan_Reverend: Keeping the old wheel connected is needed for console, though.
Driosenth: is that a din connector? It looks almost like an S-Video socket?
NotCainNorAbel: s-video...out of a keyboard why?
mariomario42: grommet time
Texan_Reverend: Would it be worth testing the new wheel first, and then see if the game needs the buttons rather than the keyboard?
Clench_Eastwood: Ian, dont forget your ESD Livestrong rubber bracelet :-P
Bobtheninjagoldfish: #AppropriateGirth
fcloud: a "bit" too big
Texan_Reverend: Gotcha. Planning to have a hole big enough to plug and unplug without removing the upper shell?
Gen2Gengar: fortuitous
mariomario42: a bulkhead connector would be awesome
Texan_Reverend: I understand the ugly as heck concern.
RomanGoro: So Ian is doing all this so next time they do Jackbox he has something better to draw with, right?
NotCainNorAbel: was that a threat or a promise?
Snowcookies: Roman no
Texan_Reverend: Heh, I just noticed Cori's classic Microsoft mouse in the background. Nice.
mariomario42: Roman yes
fcloud: yes, so he can use the steering wheel to draw with
fcloud: like you do
CaptainSpam: That is some good mic isolation.
RandomTrivia: Come on Ian, you know the drill lrrBEEJ
mariomario42: get out of here FOD
Gen2Gengar: That was surpisingly quiet
Snowcookies: A steering wheel is not a drawing implement
RandomTrivia: Noise Gate doing work
fcloud: well, not with that attitude
Bobtheninjagoldfish: @Snowcookies that depend on how much blood is on teh tires
mariomario42: oh nice!
Earthenone: a mouse ball is also not a drawing implement, ian still tried that :P
RandomTrivia: Beautiful
SnackPak_: sergeJustRight
RandomTrivia: sergeJustRight
Texan_Reverend: "This hole was made for me."
RandomTrivia: "There are many holes like it, but this one is mine"
Arclight_Dynamo: So is the idea to have the original wheel dangling off the base forever, or will that be replaced with the button box?
Driosenth: any mold stamp marking on the inside of the shell?
Aygar: Is that the new wheel or the old wheel?
Arclight_Dynamo: Old.
RandomTrivia: Perfection
NotCainNorAbel: almost like it was meant to have two wheels
Texan_Reverend: @arclight_dynamo Eventually, it should be replaced by the button box.
Arclight_Dynamo: @Texan_Reverend Perfect! Ty. :)
RandomTrivia: Could just as well replace it with a Bakelite handset for decoration
Driosenth: next time on TTSF, making bakalite
tryllebanjo: This is not the kind of Thrust-Mastering I was expecting.
Driosenth: ABS, PLA, ASA?
RandomTrivia: That lives there now
Arclight_Dynamo: This is what rubber mallets are for. Kappa
mariomario42: I'm glad he but that ring on first
SableDrake subscribed with Prime. They've subscribed for 24 months!
LRRbot: lrrSPOT Thanks for subscribing, SableDrake! (Today's storm count: 64)
VmKid: Might be easier to pull off with the wheel attached
RandomTrivia: @tryllebanjo We're accessing screwholes, is that not what you came here for? :p
tryllebanjo: Damn, you're right mr./mrs. Trivia. My bad.
Driosenth: installed 90° off?
VmKid: SeemsGood
Vezon46: are ya winnin son?
korvys: I think it's rectangular, so at worst you'd be 180 off, right?
RandomTrivia: That would be awkward if the wheel is centred off. Hands at 1 and 5 I suppose LUL
RandomTrivia: Oh no
Forgebold subscribed with Prime. They've subscribed for 39 months!
LRRbot: lrrSPOT Thanks for subscribing, Forgebold! (Today's storm count: 65)
gsyhiap: definitely maybe
Texan_Reverend: If the nuts are at all in place, the bolts should be able to pull them tight.
RandomTrivia: *IF
Driosenth: Ian, use a washer between the bolt and faceplate if you want to pull the nut into the faceplate.
RandomTrivia: lrrFINE
VmKid: lrrHERE
RandomTrivia: lrrHERE
gsyhiap: lrrHERE
Driosenth: ruined way to many prints by having the bolt head dig into the print rather than drawing in the nut
ImmortalLen: "This is absolutely maybe going to work!" Ah yes, Tinker Tailor's creed!
LordZarano: Hold the nits with the needlenose pliers?
chronically_poor: use gravity to your advantage to hold the nut in the socket
LordZarano: *nuts
RandomTrivia: Would it not be easier to unplug the old wheel while you do this part?
DrakoniteStreams: good thing about 3d print, worst case you break the print in to pieces and print a new one
VmKid: Magnets; how do they work?
ritchards: !hubris
RandomTrivia: sergeHubris sergeHubris
VmKid: Hugh Bris
chronically_poor: wheelerHub
Driosenth: 1/4-20 or M6?
Texan_Reverend: The closest thing to manufactured drama that this show has.
Alas_Babylon: Oh now that's a shiny reference right there
62MGcobra: so at this point, a steering wheel puller to take the wheel off is the best option?
Driosenth: vice grips or c-clamps?
RandomTrivia: !quote 3052
LRRbot: Quote #3052: "Oh, that's really easy actually. No, it's not." —Ian [2016-07-25]
ghyllnox: Manufacturing drama
VmKid: Oh no
RandomTrivia: Oh dear
RandomTrivia: Welp
Snowcookies: oop
Alas_Babylon: WOops
LadyAiluros: oh nooooooo
62MGcobra: hahaha
LurkerSpine: we've all done it Ian
RandomTrivia: benginTry
TheWriterAleph: jlrrBaby
gsyhiap: LUL
Texan_Reverend: Absolutely losing my shit over here!
LordZarano: jlrrFacepalm
DrakoniteStreams: can someone reboot Ian? I think we have a memory leak
RandomTrivia: !quote 380
LRRbot: Quote #380: "I will just do a hack of... Oh *** it worked" —Ian [2015-06-27]
Hexi_Lexi: if its not a Hex Screwdriver, would you prefer a Hexi Screwdriver? :p
ghyllnox: unarmeOkay elfunkPopcorn
Driosenth: cheer500 for the debate on which fastener head is best fastener head, the correct answer is not MORTORX
Painfully_Dyslexic: gah one of the worst thing about online meetings they never start on time >.< been waiting for 15 minutes at least I have Ian and chat to keep me sane
ComradeMik: "beautiful nut" - ian horner, 2021
kali_dehumanization: what's up
NotCainNorAbel: This could have been an email.
Arclight_Dynamo: Some people need to talk to other people to feel like they're getting work done. I am not one of those people.
DrakoniteStreams: meetings are usually for when managers feel lonely
asthanius: This steam could’ve been an email chain
RandomTrivia: Hi Cori!
chronically_poor: thats a really fun game
Juliamon: !clip
LRRbot: If you see something funny or particularly noteworthy, make a Clip of it! Your clip could appear in a fortnightly video or be seen at https://www.twitch.tv/loadingreadyrun/clips (Please give your clips descriptive names if you want them to be seen!)
TheWriterAleph: lrrHORN lrrCORI
RealGamerCow: This meeting could have been an email, this email could have been a slack message
Hexi_Lexi: hi cori!
ritchards: Hi Cori!
DrakoniteStreams: that's not a game, that's just answering "yes" all the time
ritchards: lrrCORI
Alas_Babylon: Hello Cori's pants and now Cori the person
margieargie: Random extra Cori!
RandomTrivia: lrrCORI
Mysticman89: you have played games for money, ergo you are indeed a pro gamer
NotCainNorAbel: lrrCORI
LordZarano: Hi lrrCORI
asthanius: Hidden Cori!
DrakoniteStreams: hi random cori
Fracaswell: Hi Cori!
VmKid: Hi Cori
dweebert91: bonus Cori stream!
andreagustafson: Hi Cori
Texan_Reverend: You DO get paid to play video games. The truest form of pro gamer.
Electrodyne: Here we see Ian's implementation of the acclaimed "Righty Tighty" technique.
TheAinMAP: lrrCORI
MichaelVYee: Hi cori
Hexi_Lexi: Ian Horner: Taker of Cori's cables
Capt_clown: My favorite is "Who will hit reply all on the all-hands email"
ghyllnox: "Could this have been an email?" "Yes but employee got 5x the work done during this meeting than they did all week..."
LordZarano: Perfect
Electrodyne: Custom Knight Rider wheel in the future?
VmKid: vroom
NotCainNorAbel: feedback is going to be tough
Arclight_Dynamo: Just bare-knuckle that steering column directly. Kappa
Bobtheninjagoldfish: !break
LRRbot: Remember chat, break time for the streamer, means break time for YOU, so get up, stretch, walk about a bit, and maybe get a drink or go to the toilet. Don't forget to wash your hands!
Electrodyne: Pipe wrench or no, @arclight_dynamo ?
Capt_clown: Quick while no one is looking, break all the things!
MichaelVYee: katesADS katesADS katesADS
Mysticman89: oh neat, I got an ad in french. Haven't seen one of those in a long time
Electrodyne: I reversed a polarity
RandomTrivia: Two Cori cameos for the price of one!
Capt_clown: I accidentally the wall socket! What do?
Electrodyne: double reverse polarity
RandomTrivia: Uh...
margieargie: Blame it on someone else
RandomTrivia: Quick, grab a drink and a snack and pretend it was like that when you got here!
Electrodyne: Also, wash it with gasoline
Electrodyne: and steel wool
margieargie: !badadvice
LRRbot: Parachutes just slow you down.
asthanius: You should it again.
RandomTrivia: :D Somehow I've never heard that as a follow up but it's amazing and I'm stealing it
Electrodyne: prime sensible chuckle material
Capt_clown: Thigh master?
RomanGoro: What are we drinking, Ian?
RandomTrivia: Eek
Arclight_Dynamo: That's blood. Collect your winnings, betters.
Bobtheninjagoldfish: What are you drinking tonight, Ian?
VmKid: We've gotta get a resolution to this story arc, did Cori get her phone charger?
Nigouki: it's fine, humans have plenty of spare skin
asthanius: Nuts and blood. What more could we need?
niccus: Cori's charging her phone to this day.
Lord_ZYRK: Just be glad your printer is taking its pound of flesh in installments
RandomTrivia: lrrAWW
Capt_clown: @nigouki Exactly! I have jars of the stuff.
Snowcookies: lmao
asthanius: Plug it into a potato
VmKid: Preferable to let your phone die, Cori.
RandomTrivia: Just need some lemons and a bunch of nails
delta__vee: read twitter in a box, read twitter with a fox
gsyhiap: nobody needs to read Twitter
DrakoniteStreams: treadmill attached to generator?
asthanius: Phone, hair dryer, bath tub
Capt_clown: Copper wire and licking 9V batteries?
ghyllnox: Solar panel with someone trying to hold it up higher on a cloudy day
Electrodyne: The bioelectrical fields of ten million Daddy Longlegs
ghyllnox: Water wheel on the shower
Driosenth: Seebeck generator connected to radioactive waste
blacktiebartender: would it help to mark the collar
Capt_clown: AT field funneled though a hotdog roller
Driosenth: the Auto Zone
aquinas_0: the children are asleep and now we shall watch ian be terrifying.... yes
ritchards: !holes
LRRbot: Water go down the hoooooollllle.
asthanius: Holes are parasites.
RandomTrivia: lrrSPOOP
aerohydra: do you ever just think about holes?
asthanius: They cannot exist without a host
Loonatic93: Did Ian get replaced with Dr. Krinkleshut?
Driosenth: How many holes does it take to fill the Albert Hall?
RandomTrivia: The Ontological Parasite argument is in the !holes command somewhere
RandomTrivia: 3,000, apparently
Electrodyne: Whole holes
RandomTrivia: At least, that's how many were in Blackburn
asthanius: “When do you stop thinking about holes?”
Loonatic93: Well, until the next episode of QWRPline.
Bobtheninjagoldfish: at least until you play over the edge again
sydnius: Weknowdis
aerohydra: do you ever just feel about holes
ritchards: !y
LRRbot: HONK!
aerohydra: im gonna ask James tomorrow
LadyAiluros: beep beep!
Capt_clown: It's always "who put the hole in the bathroom stall" not "how are the holes in the bathroom stall"
Arclight_Dynamo: The button should play the Beejdrop.
gsyhiap: lrrHORN lrrHORN
Lord_ZYRK: Like to a horn?
Electrodyne: throttle
RealGamerCow: the old timey horn from saabine?
Texan_Reverend: Yessss
RandomTrivia: I'm sorry, I must publish a correction. There were "4,000 holes in Blackburn, Lancashire" I apologise for any inconvenience caused
Driosenth: Holes don't want your thought's and prayers, they want deeds and actions
Texan_Reverend: Honk for reset.
Electrodyne: NO2
Zu_o: @Arclight_Dynamo excellent noise to go with the reset button coincidentally
NarwhalsInATrenchcoat: But... your guests are definitely going to press that thinking it's a horn
ritchards: align your relatives!
DrakoniteStreams: convenient hole for wires for custom button box
RealGamerCow: what is this wheel from?
gsyhiap: aww lrrAWW
RandomTrivia: We'll just have to stare in the gaping void in the middle
Capt_clown: @realgamercow China?
Bobtheninjagoldfish: THE MAW
Arclight_Dynamo: Just your own face.
Bobtheninjagoldfish: That wheel needs a Egmelt logo
Arclight_Dynamo: Egmelt!
gsyhiap: the blue finish looks very smart
LordZarano: Need to print a new wheel holder with a recess for the horn
Arclight_Dynamo: ^
Driosenth: Oh No, those fasteners aren't countersunk!
Texan_Reverend: @driosenth Because they are meant to be used with that ring.
Bobtheninjagoldfish: Ian, your wheel needs an egmelt logo
Electrodyne: Maybe draw a happy face to smile at you from the ring
jibkat: If you love it, put the ring on it
ghyllnox: Mod the toy car before the real car :D
Driosenth: My masters work was on fasteners, I can't help but spot those kinds of things
jibkat: It might be a bomb!
niccus: my family's car used to have the airbag that was recalled for metal shards
ghyllnox: Yay shrapnel!
Arclight_Dynamo: Ian. Promise me you will be *exceptionally* careful when you are handling literal explosives.
gsyhiap: ^^
adamjford: wait they do?
adamjford: oh no
jibkat: Why would you ask for that, the big ask is to livestream
adamjford: how long are we talking here
RealGamerCow: I got burns on my face and popped an ear drum when my air bag went off
Capt_clown: succinShock succinShock
Driosenth: Wouldn't the safest method to be to activate the airbag, then remove it.
Arclight_Dynamo: Per the Globe and Mail: It is generally believed within the industry that airbags are good for 10-15 years without concern.
jibkat: Google says 10-15 years it should be inspected
Electrodyne: 10-15 years sounds about right
adamjford: I'm wondering because we bought a 2010 car in 2019
niccus: but what's the safest way to activate the airbag
DrakoniteStreams: for those that don't know, an airbag is literally a small explosive that fills a perforated bag
Electrodyne: i did no research, just chiming in
NarwhalsInATrenchcoat: @niccus far away from people
Raiger: The safest way is to have a professional do it
Arclight_Dynamo: How do you even dispose of explosives like that?
RandomTrivia: ^^
RandomTrivia: Oops, got sniped
Phailhammer: Arclight_Dynamo Carefully. lrrBEEJ
Capt_clown: I remember an old youtube show were they microwaved one and OH BOY did that almost end badly
RandomTrivia: @Arclight_Dynamo In Wales :p
Arclight_Dynamo: @Phailhammer So... don't just throw it in a skip, eh? Kappa
gsyhiap: accidental feliciaBoom
Raiger: Stray voltage during that would be baaaaaad
Electrodyne: explosives and whales don't mix
Phailhammer: Arclight_Dynamo Depends on how close the skip is. :p
Arclight_Dynamo: Remember: It's not just explosives... it's *expired, unstable* explosives.
DrakoniteStreams: I've designed detonation system for artillery shells (fireworks), but I don't think I'd go near an airbag
jibkat: Airbags are low yield shaped charges, with a bag infront of it
DrakoniteStreams: they are safe devices, but also very dangerous
Capt_clown: They are safety claymores LUL LUL
Raiger: Always give proper respect to that which deserves it. Such as explosives handling
DrakoniteStreams: @Capt_clown haha, love it
jibkat: hense all the warnings about not having kids in airbag blast zones
Arclight_Dynamo: I'm always afraid I'll be leaning forward in the passenger seat when the airbag goes off, and it'll blow my head off.
Driosenth: Make sure to ground to bare metal or a GND terminal, old vehicles have a ton of oxidation on exposed metal and have poor electrical conductivity
srjohnlincoln: juhgvkyutg
gsyhiap: that's an horrific thought
ArdCollider: I've survived "thing between my head and the airbag" but I don't recommend it.
Capt_clown: The actor who played R2D2 I think died from an airbag if memory serves
RealGamerCow: To answer your question, it didn't save my life. It went off when a jackass taxi cut me off, and ran me into a guardrail. airbags went off, burning and popping my ear drum, cracking my windshield, and the air presure snapped the arms on my sun roof.
LordZarano: @ArdCollider oh no, what was thing?
ArdCollider: I was doing something dumb (laptop) but the driver rear-ended someone else at 35-ish mph at the same time.
TheWriterAleph: beep beep
LordZarano: oof
ArdCollider: @LordZarano an entire Sony Vaio
VmKid: Wheel has been Wheeled
ArdCollider: I was picking screen glass out of the roof liner weeks later
Raiger: @ArdCollider on the plus side, at least it was laptop and not say...axe?
DrakoniteStreams: fancy
ArdCollider: it's always fun to eat things the ER docs don't really know what to do about.
Driosenth: ka-chunk, ka-chunk
Texan_Reverend: Who wouldn't want more ka-clunk?
Arclight_Dynamo: Ian is now installing CHUNK switches. :D
gsyhiap: ER docs have seen all sorts, not much phases them
ArdCollider: no, they literally said "we... don't know what you might have accidentally consumed here." :D
ArdCollider: "we're gonna just start an IV and put some things in to help."
RandomTrivia: Needs that feeling of "several kilograms of metal are moving on the other end of this mechanical system"
Capt_clown: @randomtrivia Sounds like something one of my exes would order off Adam & Eve LUL LUL
Kcollington subscribed with Prime. They've subscribed for 46 months!
Kcollington: Its been tough to keep up on the subs monthly, but damn I'm proud of the overall duration. Closing in on four years.
LRRbot: lrrSPOT Thanks for subscribing, Kcollington! (Today's storm count: 66)
ArdCollider: it's been 20 years and I haven't turned into some David Cronenberg whatever, so.
TheWriterAleph: good stuff plus = bad stuff minus. that's science
Texan_Reverend: They go in until just before the screw portion would get proud of the print.
Texan_Reverend: Because the ball will give, but the screw body won't.
noahbarto subscribed at Tier 1. They've subscribed for 16 months!
LRRbot: lrrSPOT Thanks for subscribing, noahbarto! (Today's storm count: 67)
Texan_Reverend: Fortunately, the body of the shifter has enough room to reach the tool down into it.
Driosenth: Ian, is your LG Monitor connected via DisplayPort or HDMI? Mine is connected via HDMI and all the windows shift around when it goes to sleep.
Driosenth: 43?
Texan_Reverend: I use a 55" 4k TV as my monitor, and I quite like it.
Mysticman89: ltt has somewhat advocated for using certain modern LG tv's as a monitor
DrakoniteStreams: in 2007 I went to a lan party, and someone brought a 42" TV as their monitor
ashiok_nightmare_moose: for a while they only put the good features >50 inches
Texan_Reverend: There are a few models which have lower refresh rates and work better for the task.
Raiger: I can't bring myself to use a single large monitor over multiple smaller for whatever reason
ashiok_nightmare_moose: TCL is doing the lords work in bringing down prices of tvs w good features
Driosenth: I'm using is a LG CX48 OLED for my main monitor, only real problem was the auto-dimming, which was fixed by getting a service remote
Bobtheninjagoldfish: #aggresive
Molladia: Just got the email, DB2020 shirts have started shipping YAY
DeM0nFiRe: My TV is a TCL. It's not amazing but can't really complain for the price
Arclight_Dynamo: Do you think they use hex heads in order to dissuade most people from getting in there, while not going full-on security screws so hobbyists can get in there easily?
ArdCollider: our TV died during lockdown, and we just went for the nearest available decent 4K, so TCL it was
Texan_Reverend: I have to sit about 2 meters or more from my screen to keep from getting headaches, so a big TV works bettwr for me than multiple monitors.
DrakoniteStreams: @Arclight_Dynamo nah, hex are getting to be more common in general, at least with metric
Arclight_Dynamo: @DrakoniteStreams Huh!
Driosenth: Hex is slightly easier for production line work.
Arclight_Dynamo: I guess that scans. I just figure most people don't have a hex set, but maybe I'm wrong.
Mysticman89: multiple small monitors compared to one large is nice to me both out of habit and ease of organising desktops. (yes, you can set up virtual desktops, but thats effort.)
Rogue_07: I heard "ork" security
ashiok_nightmare_moose: @Texan_Reverend do you use Fancy Zones or an equivalent for dividing up the screen real estate?
Texan_Reverend: Ian, be careful of the wire when lifting this bit out.
Rogue_07: which conjures up a certain image
Alas_Babylon: Oh hey, 100k channel points
DrakoniteStreams: @Texan_Reverend oof, are you in the nasty bit of texas this week?
Texan_Reverend: It has a single zip tie anchoring it which will need to be clipped in order to insert the new piece.
DrakoniteStreams: @Texan_Reverend if so, I hope you've managed to stay safe, warm, and well
Texan_Reverend: @drakonitestreams No, I moved to Seattle, but family is still there. Fortunately, they stocked up like they would for a hurricane and have firewood. So, they're ok.
Raiger: I know what I must do Sam. But I don't know if i'm strong enough to do it
Texan_Reverend: Once the zip tie is clipped, then the gate can be slid up and off the stalk.
DrakoniteStreams: what exactly are we changing right now?
Texan_Reverend: I forgot to ask...do you have some grease handy, Ian?
andreagustafson: tweezers?
Texan_Reverend: Before uaing it too hard, it's worth adding grease to the surfaces of the print at each end which contact the metal walls of the shifter body. The print has to slide side-to-side there, and grease reduces wear.
Texan_Reverend: @drakonitestreams We're inserting a module to enhance the tactile feedback of shifting.
Texan_Reverend: Thay ought to work.
Texan_Reverend: That*
62MGcobra: elfunkChunk
RandomTrivia: That looks incredibly satisfying
RandomTrivia: Bouncy things are hyper-optimists - "Springs hope eternal" lrrbEEJ
RandomTrivia: lrrBEEJ
Mysticman89: physicists love springs. model everything as a spring
Texan_Reverend: The spring is good, but check it after a while to see if it has ridden up anyway. If it gets too high, it will block sideways motion of the shifter stalk.
ashiok_nightmare_moose: pliers save the fingies!
LordZarano: "Springs are good and I like springs" - Ian Horner, 2021
Raiger: Physicists also love a frictionless vacuum...until you put them inside one
RandomTrivia: LUL
RandomTrivia: "Just model yourself as a point"
ashiok_nightmare_moose: a dot of solder maybe?
Texan_Reverend: Worst case, the print might need to be redone. Fortunately, the screws could just be transferred to a new print.
Raiger: I still remember the cow book I read for physics in high school..."Imagine a cow as a sphere"
ashiok_nightmare_moose: classic round cow
RandomTrivia: You know, like you find in the wild :D
gsyhiap: @raiger like... a moo-n?
Mysticman89: imagine everything is a point particle, neglect air resistance, and model the interaction as a simple harmonic oscillator.
LordZarano: @Raiger Wait that was an actual thing? I thought that was just an internet joke!
Mysticman89: if you cant do that, it's an engineering problem and not a physics problem
Raiger: @gsyhiap how else do we get all that cheese?
RandomTrivia: @Mysticman89 Isn't that one of the sines of the apocalypse? lrrBEEJ
Raiger: @LordZarano yup! It was one of the examples in the book - a lot of it was about making simplifications for modeling reality in an easier to handle way but still accurate enough for your purpose
Mysticman89: the sines of the apocolypse were heralded by the ancient soh cah toa
Arclight_Dynamo: Can you pop those in and out on the fly? Like, when you change cars, you can reconfigure the shifter?
RandomTrivia: sergeJustRight
Raiger: Fear of Physics - we called it the cow book due to the picture on the cover and that cow as a sphere model
Texan_Reverend: @arclight_dynamo That's the idea, yes.
Arclight_Dynamo: Nice!
Mysticman89: I'm pretty sure theres a griffiths problem that features a bear that moves at mach 3
Texan_Reverend: For LRRMans, it would be worthwhile.
RandomTrivia: Oh you mean like 24h of LRRMans? LU
RandomTrivia: LUL
DeM0nFiRe: Does Phillip know you are using his screws?
DeM0nFiRe: True
omdorastrix: A bit of a square tho
Arclight_Dynamo: Robertson is strictly superior to Phillips.
Arclight_Dynamo: I will die on that hill.
Driosenth: The worst drive type is Dovetail
Gen2Gengar: kookoo kachoo Mr Robinson
Arclight_Dynamo: Unidirectional flathead is awful.
Driosenth: You can drive dovetails in with way more torque than they should be rated for and utterly destroy the threads
scratchmonkey subscribed at Tier 1. They've subscribed for 31 months!
scratchmonkey: nice vest!
LRRbot: lrrSPOT Thanks for subscribing, scratchmonkey! (Today's storm count: 68)
RealGamerCow: I had to use square head screws to screw down cementboard backer for a tile floor. They're fine until the bit head starts to round out.
Arclight_Dynamo: No, sorry, it's unidierectional because you can only drive it in, not take it out. It's a security screw.
ashiok_nightmare_moose: if you want people to use things other than screwdrivers flat head is there for you
Dumori: Flat heads are OK for low torque and you want it to be easily serviceable with out correct tools
rrtycoon2: the ones that are flat on the CW faces, and sloped in the CCW?
Arclight_Dynamo: @rrtycoon2 That's the one.
Texan_Reverend: Yes. Routinely used in restroom stall dividers.
DrakoniteStreams is a torx fan
DeM0nFiRe: Gotta be honest, this conversation has been pretty screwed up
Bobtheninjagoldfish: so is the pan to have the button box done for sunday?
Driosenth: MORTORX are unidirectional offset cruciform drives that can take a boatload of torque. If you see one on something they don't want anyone removing it
Bobtheninjagoldfish: EGMELT
OldManJohnsonMB: Does Texan_Reverend have a good logo you can use?
Bobtheninjagoldfish: ooooh
DeM0nFiRe: A triple project tinker tailor solder fry? Fun!
Arclight_Dynamo: So, can you explain why the RicmoTech thing is desirable? Like, I get it effectively shortens your shifter rod, but why is that good?
Texan_Reverend: "That man" had 20 minutes and Photoshop...
DrakoniteStreams: I don't want to jinx anything, but is it my imagination or has the success rate of TTSF projects gone up quite a bit?
Arclight_Dynamo: Oooh! I see! That's neat!
Roadhog123: How does the firmware deal with the shorter throw?
Dumori: more clicky!
DeM0nFiRe: short throw kaclunky as the pros call it
Hexi_Lexi: hey ian, randomish question. did you ever name your new toaster? i honestly forget
Driosenth: Do you know the brand of hall effect senor is in it?
Roadhog123: Ah ok, recalibration makes sense.
Driosenth: Honeywell?
Texan_Reverend: Shifter ready for test use.
Bobtheninjagoldfish: !break
LRRbot: Remember chat, break time for the streamer, means break time for YOU, so get up, stretch, walk about a bit, and maybe get a drink or go to the toilet. Don't forget to wash your hands!
ghyllnox: "Shifts upgraded" unarmeHeart
Snowcookies: You can't tell me what I need to do!
Driosenth: what brand shifter was that?
Texan_Reverend: @driosenth Thrustmaster TH8A
Driosenth: @Texan_Reverend thanks
Texan_Reverend: Ian's rig is now back to being 100% Thrustmaster.
Bobtheninjagoldfish: inso far as a heavuly modded with third party parts rig can be
RandomTrivia: Soon it will be the Thrustmaster of Theseus
Texan_Reverend: The original components are all Thrustmaster which is key to software, spare parts, and calibration concerns.
Snowcookies: lol
Snowcookies: I can't believe Garfield Kart is gonna be on the next CTS
HeyAustralia subscribed at Tier 1. They've subscribed for 10 months!
HeyAustralia: 10 months of being subscribed for LRR content! Happy to be a part of this awesome community, and enjoying watching my first Tinker Tailor stream in real time!
LRRbot: lrrSPOT Thanks for subscribing, HeyAustralia! (Today's storm count: 69)
RandomTrivia: lrrHORN Sub HYPE Nice! lrrHORN
aliceous2 subscribed at Tier 1.
LRRbot: lrrSPOT Thanks for subscribing, aliceous2! (Today's storm count: 70)
Lord_ZYRK: Huh, I just noticed the Black Space Ranger on Ian's screen
aliceous2: long time viewer first time subscriber\
Dumori: A cardboardbox!
Texan_Reverend: That's actually a pretty slick overall package.
Texan_Reverend: I like how easy it is to connect the wiring to the buttons.
DrakoniteStreams: IIRC you can program those boards to have buttons emulated as any keyboard key
Arclight_Dynamo: "What chip is that?" "Don't worry about it."
Bobtheninjagoldfish: Reset should be red
Bobtheninjagoldfish: and green should be "Give Race Director the finger"
ashiok_nightmare_moose: you could do an inverted T for the 'd pad'
DarkMorford: Oh, that's a lot of buttons
ritchards: the proper order is WUBRG! ;)
Arclight_Dynamo: I'd even have the top four the same colour.
Driosenth: Found the Hall Effect Sensor in the TH8A, it's a AS5013. Nice little TQFN16 Chip, 3.3V Vcc, I²C interface, 5 on-board hall effect sensors, each 8-bit resolution, with about a 8 um sensitivity
Arclight_Dynamo: Fair.
TheDailyMapleSyrup: move the t up a row & white at the botom
Nigouki: Hit the white button Kronk! Wrong button!
Bobtheninjagoldfish: you need one with a cover and a flip ala a missle launch. and hae it it marker 'SELF DESTRUCT"
NotCainNorAbel: drill holes in the top to have more buttons?
Driosenth: Add a Detent Encoder or two?
Snowcookies: lol
SnowBuddy18: got it, always let Ian get involved in button design
Nigouki: we're gonna end up printing an entire keyboard layout for these aren't we
ZombieHendrix: thread a horn button through the wheel column?
Mysticman89: are we constructing an enigma machine now?
Tally_Tamale subscribed with Prime. They've subscribed for 40 months!
LRRbot: lrrSPOT Thanks for subscribing, Tally_Tamale! (Today's storm count: 71)
SnowBuddy18: yeah, putting the beer in the wine barrels
DarkMorford: Oh, button design? I have experience helping with that! :D
DrakoniteStreams: is he going for the hat trick of businesses?
SnowBuddy18: to be fair, all the alcohol is 1 business out of 1 location
Bobtheninjagoldfish: "Ian where is there a button where with a flip cover called "Moonbase Self destruct mechanism"... "Don't sorru abuot it Cori"
ashiok_nightmare_moose: hes gotta be well past a hat trick now
Arclight_Dynamo: Heh, I've been avoiding the Gretzky stuff *because* it's Gretzky stuff. Seems like sponsorship for a not great product. :D
TheDailyMapleSyrup: Switch green and blue
jibkat: yesss
DeM0nFiRe: Personally I would put the green and red next to the stem of the T
Driosenth: are those monetary switches NO, or NC?
jibkat: the whites are clearly left or right now
DarkMorford: @LoadingReadyRun Maybe flip the black T to get sort of a WASD formation?
DrakoniteStreams: just remember, you want the most commonly used buttons at the bottom, as that is nearest your hand
SnowBuddy18: @Arclight_Dynamo it's less sponsorship and more a business he owns, the beer isn't great, but the whiskey's pretty good and I've heard the wine isn't bad
Texan_Reverend: Would it make more sense to invert the D-Pad to resemble WASD?
RealGamerCow: Not stop light for a column?
Bobtheninjagoldfish: if up you are looking to imitate WADS, then shouldn't the stem be.. oh someone else pointed it out
Texan_Reverend: @darkmorford beat me to it.
Arclight_Dynamo: @SnowBuddy18 Oh, huh... interesting. If he actually owns it, that's different entirely. Even if I'm enh on the branding. :D
serramarkov: My favorite thing about Gretzky is that he only cared that his team was scoring, not who on his team was scoring- which is why he is and will always be among the greatest players in sports, not just hockey.
Driosenth: 'E' to confirm
DeM0nFiRe: Nice, looks like a good layout
Texan_Reverend: Ian, did the final piece of this whole setup get verified funtioning earlier today?
ashiok_nightmare_moose: theres the wine the restaurants and he was a part owner of the argos iirc
Driosenth: 'Q' to Quit
jibkat: sooo close
ZombieHendrix: so close
RandomTrivia: Huh
Bobtheninjagoldfish: gennaLUL
margieargie: Not quite how that works Ian
Texan_Reverend: hahahahaha
Arclight_Dynamo: tiltyhPLS
Lord_ZYRK: Hit the reset button lrrBEEJ
DrakoniteStreams: F
TheDailyMapleSyrup: lol
RandomTrivia: lrrFINE
DeM0nFiRe: lrrFINE
jibkat: get some height before the flip slam
jibkat: Just like flipping a pancake
SnowBuddy18: @ashiok_nightmare_moose the restaurant is closed
aliceous2: lrrSPOOP
ashiok_nightmare_moose: yeah
RealGamerCow: gaff those in place
ashiok_nightmare_moose: but still counts toward the hat trick yeah?
DeM0nFiRe: gdqClap
SnowBuddy18: of course
margieargie: lrrHORN lrrHORN
TheMerricat: TableHere FlipThis
quillilian: I've done something like flip irl and tried to ctrl+z. On a non-existent keyboard. For a physical oops
korvys: Just do it like you flip a grilled cheese :P
DrakoniteStreams: I love adding too many buttons to things
Driosenth: are those 1/8" blade terminals?
coronax_cj subscribed with Prime. They've subscribed for 26 months!
LRRbot: lrrSPOT Thanks for subscribing, coronax_cj! (Today's storm count: 72)
jibkat: or when you flip mattress?
DeM0nFiRe: Haha
SnowBuddy18: oh god no
jibkat: HUWAH
DrakoniteStreams: twitch plays soldering?
SnowBuddy18: Twitch plays circuitry sounds dangerous
Driosenth: All you need to do is swap the nozzle for a gripper on your 3D printer for a Pick&Place
Arclight_Dynamo: Armatron?
Lord_ZYRK: Armatron?
Texan_Reverend: YESSSSS
Texan_Reverend: Exactly, @arclight_dynamo
jibkat: Now I want a saw on an arm,
Arclight_Dynamo: Armatron, eBay, $70 USD.
jibkat: twitch plays woodcarving
Lord_ZYRK: I had a science teacher with one of those, but that guy was a prick.
SnowBuddy18: @jibkat duct tape can do that for you
RandomTrivia: lrrWOW
RealGamerCow: twitch plays woodburning
Arclight_Dynamo: Six-axis lathe.
Raiger: Twitch Plays CNC?
DarkMorford: Armatron hooked up to Twitch, have it drop a coin into a bank for every sub?
jibkat: yess
Lord_ZYRK: That's just a shop fire with more steps, Ian
TheMerricat: twitch causes bodily harm?
DrakoniteStreams: I have seen someone with an arm that slaps him when people redeem for it, also one that shoves chips in his mouth
jibkat: Coin op, now its wallstreetbets plays woodwork
Driosenth: each 50 bits is a line of G-Code
Texan_Reverend: Ian, did the under-desk piece of this whole setup get verified funtioning earlier today?
Nigouki: bit messages are the inputs seems like a perfect online coin-op idea
ashiok_nightmare_moose: twitch plays crane game?
WhoseGamewasitZ: nliHULLO nliAhhh
Texan_Reverend: Ok, cool.
Texan_Reverend: We'll do it live!
ashiok_nightmare_moose: like a bit driven crane game could be a dece channel addon or something
jibkat: And if you pull the item out, it gets mailed to you?
jibkat: Oh, did we just invent online gambling?
ashiok_nightmare_moose: unlocks a special emote
RandomTrivia: !advice
LRRbot: 5% or less is a little. 15% or more is a lot.
Driosenth: hold the nut stationary and turn the button
ritchards: use a robot arm! ;)
RandomTrivia: Thanks LRRbot
LordZarano: Use the pliers? Would that help?
DeM0nFiRe: Might be easier to do one button at a time? So you can pick it up with 2 hands to hold it from both sides?
DrakoniteStreams: it's easier if the hole for the button is keyed. failing that I use some pliers to strip the nuts, I mean to tighten the nuts
jibkat: #advise; use the force
ashiok_nightmare_moose: !badadvice
LRRbot: Dye it with your blood.
DrakoniteStreams: Ian, are you fairly new to 3d printing?
DeM0nFiRe: I kind of want to get a 3D printer but so far the only thing I can think to do with it is maybe print parts for fixing worn N64 joysticks
DrakoniteStreams: yeah... mine is not dialed in the greatest, but I try to use it not work on it
Driosenth: What do you use to level the bed, I have a cheap shim-gauge set
Texan_Reverend: If you haven't fiddled with it yet, I think you'll like one black spring and one red spring with two or three washers for minimal but existant take-up.
Arclight_Dynamo: "You do need space to extrude fluid." - Ian, just now
Raiger: The best 3d printer is the one your friend has that prints stuff for you! ;)
jibkat: @DeM0nFiRe Is there a 3d printing co-op shop you could mess around in?
DeM0nFiRe: Ah good question maybe I should look into that
LurkerSpine: I much prefer my resin printer over my FDM printer
DrakoniteStreams: @Driosenth calibrated cheap note pad, where the pages just happen to be the right thickness :D
DarkMorford: I need to see if we have a set of feeler gauges in the lab at work. Those could be useful for getting the nozzle-bed gap consistent.
jibkat: In Vancouver there's a few, not that helps you probably
Raiger: If I get a printer ever it'll just be filament...I don't think I want to deal with all the extra 'stuff' for resin with ventilation and everything
LurkerSpine: I've found resin prints to be way easier, but it's way more expensive
thebuzzstreams: Don't forget the fumes with resin 3d prints.
DrakoniteStreams: resin are much more fragile/brittle
DarkMorford: I kinda want to get an FDM printer for personal use, I just don't know where I'd put it. Or what I'd make with it.
Raiger: My friend got a resin 3d printer and apparently did not realize the additional hazards of the resins used...
jibkat: Fast, cheap, good; pick two
DrakoniteStreams: @DarkMorford it's a good time for cheap, small printers
lemmel: My resin printer has been much less of a pain, but I need to work on the prints being less brittle.
LurkerSpine: All I'm saying is, having done both, resin is easier for me. I'd rather deal with the fumes than having to continuously level the bed
DrakoniteStreams: resin is awesome for minis. if I start DMing again I'll probably need to buy a resin printer
iris_of_ether: That's my secret: I'm just loading up on painted minis and terrain for whenever gaming in person is safe again....
Texan_Reverend: Mastodon message sent.
Gen2Gengar: How long until lead 3d printers
Arclight_Dynamo: Hm. There are CNC machines for $250 USD on Amazon. It only does plastic. But that might be better than 3D printing?
DarkMorford: @DrakoniteStreams I was looking at maybe the Creality Ender 3 series. Looks like they're around $200 USD, but again I don't think I have a space big enough (or stable enough) to keep one set up.
jibkat: Oh god the weight/cost/danger Gen2Gengar
NotCainNorAbel: does your condo have rules against a CNC?
quillilian: A glass bed and auto-leveling has been a great timer saver for FDM printing, but there are extra costs
Rekiara subscribed at Tier 1. They've subscribed for 28 months!
LRRbot: lrrSPOT Thanks for subscribing, Rekiara! (Today's storm count: 73)
iris_of_ether: Laser cutting is neat. At least for that, I can pay a local friend :D
DrakoniteStreams: laser cutters are super expensive, and I don't think I could bring myself to fight a k40
Driosenth: it's scary how janky the cheap K40 CO2 lasers cutters are.
Lord_ZYRK: Ian, you're falling a bit short there. What you really want is a laser metal sintering printer.
iris_of_ether: Fellow LRR enthusiast (and pal) Sevenishmagpies has a Glowforge, IIRC
DarkMorford: @Arclight_Dynamo You monster :p
Arclight_Dynamo: @DarkMorford I'm an enabler!
DrakoniteStreams: but, two maker-ish tools I'm looking for next are an airbrush, and a camera I can use at my workbench (maybe not that order)
jibkat: Can I get the akira laser on a machine arm?
iris_of_ether: Yup! The chess board from my Desert Bus auction was Glowforged
Driosenth: From experience with a K40's larger sibling. You have to strip the board out, add reliable safety cutoff switches, and a fan duct into a real HEPA filter.
aiamethyst: I have a cricut for fabric but I'm definitely eying a glowforge
LordZarano: An electron beam sinterer that can print in titanium
DarkMorford: I need to find what I did with those booklets; I have instructions somewhere for making an aluminum forge out of one of those big holiday popcorn tins.
iris_of_ether: I wouldn't have even bothered with wood if not for that. My backup was gonna be dental-grade plaster, cast into a significantly heavier piece :P
DrakoniteStreams: glowforge would be more compelling if it wasn't cloud based. that's a deal breaker for me :-/
ImmortalLen: I've been thinking about getting a 3d printer to print figures like pokemon and Kirby, paint them, and sell them on Etsy and cons(When they start up again that is.)
jibkat: Can you hack them?
Crock272: Get some 3M aerospace grade 2216 epoxy and they'll stay where they're told to stay
Bobtheninjagoldfish: Ian, I'm gonna need you to make one of thse button boxes that just has a bunch of dummy switches like "Beej's Deactivation buttion" "Moonbase Self destruct" "Make James Draw a land" and so forth
LordZarano: @DarkMorford NighHawkInLight has a video about how to do that using a homemade intumesent dough
actionjb: The cloud is fake, don't let anyone tell you otherwise
DrakoniteStreams: there are similar machines that are not cloud based, but 4-5k price range keeps me from looking too closely
jibkat: xkcd cloud?
DrakoniteStreams: exactly Ian, those cloud services aren't going to be around for ever, nor is my internet that reliable
Driosenth: POT the entire thing
iris_of_ether: There are conductive epoxies!
DarkMorford: @Bobtheninjagoldfish Only if one of them says "Do not Press" and plays an annoying Christmas song. :p
iris_of_ether: (We use some at work)
LordZarano: The cloud is just someone else's computer
Arclight_Dynamo: "Generic USB Enabled Device." You watch.
DarkMorford: @LoadingReadyRun What interface board is that, Ian? I wasn't here for the start of the show.
Bobtheninjagoldfish: @DarkMorford yessss. or just plays 'Input accepted" and then does nothing so people just worry
DrakoniteStreams: @Bobtheninjagoldfish is the james' button just stuck pressed?
Bobtheninjagoldfish: @DrakoniteStreams yes.
Arclight_Dynamo: @Bobtheninjagoldfish "Thank you for your legal consent."
Bobtheninjagoldfish: @Arclight_Dynamo "A representative will be contacting you soon"
DrakoniteStreams: @DarkMorford it's generic without a name, just search for arcade button sets and you should find one
Lord_ZYRK: "Transmission successful"
Arclight_Dynamo: @Bobtheninjagoldfish :D
Driosenth: Can you read the characters off the IC? we could look up what it is capable of.
DarkMorford: Oh goodie. :p
Arclight_Dynamo: @Driosenth The IC is under a wodge of ceramic.
Nigouki: button that just starts throwing up lrrFINE on the screen at increasing rate
Bobtheninjagoldfish: Princess Vespa?
TheDailyMapleSyrup: bubs
DarkMorford: Ah, yep. Found something that looks just like that on multiple sites. >_>
niccus: you don't skate beef?
SquareDotCube: Ian has a beef with skate beef
RandomTrivia: !quote 5911
LRRbot: Quote #5911: "This is the strongest beef I've seen in awhile!" —Wheeler [2019-03-16]
Bobtheninjagoldfish: !box
LRRbot: In the box is: betrayal...
DrakoniteStreams: HAHA you just called me out Ian
Driosenth: Those polarized locking connectors are JST's, probably JST-PH or JST-XH. They are handy and easier to crimp than dupont
DrakoniteStreams has so many small metric screws, for 3d printing mostly
jibkat: Oh I have a question for Ian; how is the plasma TV holding up?
ashiok_nightmare_moose: you can pinchy them a bit to make them hold
Lord_ZYRK: ^
Driosenth: Those M3 fastener kits from amazon with various thread lengths always comes with one less screw of the size you need
Texan_Reverend: Maybe little pinch?
Texan_Reverend: That was a throwback to a 2000s Honda Element add series with a crab. Don't worry about it.
LordZarano: Just a little pinch, as a treat
iris_of_ether: lrrSIGNAL lrrHORN
Driosenth: @Texan_Reverend I have a tiny fork and some melted butter
Texan_Reverend: @driosenth THANK YOU
Texan_Reverend: No pinch. No pinch.
Driosenth: @Texan_Reverend I liked that those commercials
RandomTrivia: !schedule
LRRbot: Want to know what's coming up? Check out https://loadingreadyrun.com/live for an interactive schedule, or http://lrr.cc/schedule for a Google Calendar version.
Gen2Gengar: monocolor Gladiator
DeM0nFiRe: Hey look I am on Ian's monitor!
iris_of_ether: That's a nice cross-stitch
AutonomousTurtle: What sizes are those monitors? That's a nice setup.
leebenningfield: wait is the AEK II hooked up to a PC
Lord_ZYRK: Goodbye forever, Ian
RandomTrivia: Oh goodbye
Texan_Reverend: @autonomousturtle 43" main. not sure about side.
Texan_Reverend: @leebenningfield It's a Hackintosh.
AutonomousTurtle: Thank you! Dang, that is choky.
leebenningfield: ah
AutonomousTurtle: Chonky, even
Bobtheninjagoldfish: Ian is the the helment of the black SPAce ranger? /Megaranger Black That I was seeing on your montior?
iris_of_ether: Ah! Sarah does good things :)
jibkat: USB for dayyysss
Lord_ZYRK: There was something definitely Black Space Ranger adjacent in that one window.
Lord_ZYRK: It's okay, Ian. We won't tell anybody :)
jibkat: From the sound of the keys, I think I know the password
TheMerricat: hunter18?
jibkat: "1 2 3 4"
RandomTrivia: LUL 2FA?
Dumori: Lol
Driosenth: Did you know that it's possible to determine a password by an audio recording of the keyboard as the password is entered?
Mickey019: Crotch shot 👍
HundreydAundre: Oh, is that a mouse? I believed it to be another steering sensor.
LordZarano: So will the big wheel be good for driving a virtual bus? Across a desert for example?
RandomTrivia: B I G G E R than before
DrakoniteStreams: confirmed: ian is not smol
jibkat: I like how they proved Van Eck phreaking is doable with a LCD display
leebenningfield: well I just discovered the ADB-USB Wombat which adapts both ways and I need one
Texan_Reverend: Ian, if your force feedback wasn't all the way up, you might need to raise it a bit to get a similar feel to what it was before.
Texan_Reverend: Did the shifter body get 180ed in the process?
DrakoniteStreams: map extra gears as dpad? Kappa
Texan_Reverend: Excellent!
jibkat: Sunday! Sunday! Sunday!
ZeroArcana: sunday, Sunday, SUNDAY
LordZarano: Sunday Sunday SUNDAY!
Texan_Reverend: You're moving, so I assume pedals work.
RandomTrivia: lrrHORN Success! lrrHORN
HundreydAundre: Bee there! Ore BEEJ-WARE...!!!
Bobtheninjagoldfish: No Ian I'm pretty convinced that is a range rheloment in the bottom right corner.: https://imgur.com/a/Wk12uhZ
RealGamerCow: Next project: isolating vibration/movement from shifter.
RandomTrivia: Excellent, functioning as normal!
Roadhog123: You have shift up/shfit down mapped as well as invididual gears, which probably isn't helping?
RealGamerCow: Wow, the hand motions are 1 to 1
DeM0nFiRe: gdqClap gdqClap gdqClap
Texan_Reverend: Pedals good?
Texan_Reverend: Great!
DrakoniteStreams: success \o/
iris_of_ether: Thanks for the stream :D
Nigouki: Thanks for the stream!
NotCainNorAbel gifted 3 months of Tier 1 to Texan_Reverend. They've gifted 13 months in the channel!
LRRbot: lrrSPOT Thanks for subscribing, Texan_Reverend! (Today's storm count: 74)
LordZarano: No, Thank You!
Texan_Reverend: I'll be there Sunday.
Texan_Reverend: Thanks! @notcainnorabel
jibkat: Sunday Sunday, SUNDAY!
wedge_x subscribed with Prime. They've subscribed for 11 months!
LRRbot: lrrSPOT Thanks for subscribing, wedge_x! (Today's storm count: 75)
niccus: wait, is it still bezos
NotCainNorAbel: @Texan_Reverend Thanks for keeping Ian occupied
DarkMorford: Aren't they not Bezos anymore?
DrakoniteStreams: I just looked up mortorq and, noooo. make it stop
RandomTrivia: Why would anyone make that?!
RandomTrivia: That's just unnecessary!
ritchards: !next
LRRbot: Next scheduled stream: CheckPoint+ (Paul, Beej and Heather chat about Video Games and Video Game related news :D) at Fri 02:00 PM PST (17:49 from now).
TheDailyMapleSyrup: See you for the Ian Sunday Special ;)
Driosenth: MORTORQs are unidirectional offset-cruciforms that can take a ton of torque, If you see something with these, they really don't want you to mess with whatever it secures. https://www.semblex.com/sites/en/assets/Image/Products/MortorqSuper/Mortorq-Super-lg.jpg
DarkMorford: As if people didn't get confused enough with Philips and Pozidriv, do we really need another cross-shaped one?
RandomTrivia: See you on Sunday for another Ian-stravaganza!
DeM0nFiRe: o/ lrrHEART lrrIAN
iris_of_ether: ! Ooooooh, audio amps
RandomTrivia: LUL
DrakoniteStreams: oh no, Ian is going to be an audiophile
RandomTrivia: He said the thing! Roll credi- oh, you have
LordZarano: Right, I'll have to do my Checkpoint homework :D
DrakoniteStreams: night therea48Wave
LordZarano: Goodnight everyone!
RandomTrivia: Goodnight friends, take care!
Electrodyne: Good night internet friends
DeM0nFiRe: o/